719131
8
Zoom out
Zoom in
Previous page
1/12
Next page
User manual
Please read this instruction manual carefully to ensure correct use of the machine
Thank you for purchasing this DMR Semi Auto Washing Machine.
The design of this product has adopted the special patent technology of cabinet integration. The entire body casing is made of plastic and
this ensures that your DMR semi auto washing machines will never be rust eaten. The washer is relatively lighter and space saving as
compared to other general twin-tub washing machines.
Through the integration of new technology, this washer with large wave pulsator and new water ow, will not only produce less twisting
of the clothing but also better cleaning and washing effect. The functions of water inlet, sprinkling, spin-dry and water ow are also made
available to save time, labor and water usage.
We trust that you will nd your purchase of this beautifully designed and dignied-looking semi auto washing machine to your satisfaction
Technology parameter and specications
Water capacity Input power Power source Size (lxwxh) Weight
high low wash dry voltage hertz 655x405x760 (mm) 15kg
36 L 32 L 250 W 120 W 220 V 50 Hz
Troubleshooting
Problem Reason Solution
The pulsalor is too slow Power cut or switch off Switch on the power
Transmission belt left off Assemble the transmission belt
Belt pulley has become loose Tighten the belt
Pulsator is blocked Remove the block
The pulsalor does not
rotate
Belt is loose Tighten the belt or renew it
The clothes in the spin dry tub loosened Tighten the belt and the screw
Abnormal noise and
vibration
The clothes in the spin dry tub is unbalanced Replace the clothes in the tub
There is something jammed between the pulsator
and the wash tub
Remove the jammed object(s)
Water leaks from the
wash tub
Wash tub was not connected tightly to the hose Reconnect and tighten the hose
Spin-dry basket does not
rotate
The slight switch is in loose contact Adjust the contactor of the switch
The xed screw of spin dry basket or shaft coupling
is loose
Tighten the screw
The xed screw of spin dry basket or shaft coupling
is loose
Remove the textile
Brake dragline is loose Tighten the dragline
The spin tub does not
drain
Something had cropped into the space between
spin tub and spin dry basket
Remove the object
Points of attention:
When the problem cannot be resolved, please contact the Service Center.
For your own safety, ensure that the ground connection is correct.
Never put your hands into the spin tub whilst it is working.
Never wash textiles containing volatile materials in order to avoid machine damage or water blockage due to stains.
The timer should always be turned clock wise
When abnormal sounds/movements occur during operation, stop the washing machine as soon as possible and check. (Please refer
to troubleshooting)
When washing, the water temperature should be below 60˚C, otherwise, the plastic components may be deformed.
ENGLISH
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mestic MW-120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mestic MW-120 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info