494961
27
Zoom out
Zoom in
Previous page
1/34
Next page
Tr o u b l e s h o o t i n g
2 3
When SET: ACTIVE OUTPUT / DVI is selected within the SETUP MENU, the ANALOG
OUTPUTS are disabled; however, will pass analogue to analogue signals (select appropriate
input on the display).
There is Dark Banding/Streaking while the video image is
changing; how do I fix this?
The video image is either positioned (Phased) too far to the left/right, or the image is too
wide. Though the image may be “filling” the viewable screen area, the display is having
difficulty finding the actual Clamp Pulse (sync signal). The display is now “Clamping” to the
Peak Whites of the video signal; or rather, “clamping” to video, not the sync pulse.
You should recalibrate the display device utilizing a master video test pattern. Utilize a
Component (YCrCb) DVD source and a Safe-Area test pattern (AVIA or DVD Essentials
calibration DVD).
Digital Display Device (Plasma, D-ILA, DLP or LCD)
Utilize a “Screen Area” test pattern from a calibration test DVD
Reduce the video image size until you see the Active Picture area of both the left side
and right side of the video image
Center the image on the screen using the positioning controls of the display device only
Digital displays will have sizing controls labeled Pixel Clock, Dot Clock or just Clock, etc.
This adjustment will expand/contract the image to from the Right; the Left side of the
image should remain relatively fixed to its position
Use Horizontal Size, Positioning controls and Clock adjustment to center/position the
image on screen.
You will need to utilize all controls to achieve/massage image centering.
Once the image is centered correctly, fully expand the image to the edge of the screen.
Analogue CRT Display Device
Use a “Screen Area” setup pattern from a calibration test DVD.
Reduce the image size by 10% to 15%.
Un-blank Left, Right, Top and Bottom Blanking.
Increase BRIGHTNESS to 75%.
Image should be clearly seen within the raster area.
Phase picture to center image within the raster area.
Center raster (with image) on the screen.
Blank Left, Right, Top and Bottom Blanking to edge of image.
Increase Left/Right and Top/Bottom Size to the edge of screen.
My picture is Magenta or Pinkish in color
RGBHV out into YPrPb in = MAGENTA picture.
The default analogue ACTIVE OUTPUT of the DVP1080 is 5-wire RGB (RGBHV). If your only
video input option to the display is via YPrPb, you must first change the ACTIVE OUTPUT on
the DVP-1080 from RGB to YPrPb within the SETUP MENU.
Note: The DVI OUTPUT is disabled once YPrPb has been selected; YPrPb is not a valid
output format within the DVI domain.
Enter the SETUP MENU by pressing
Menu on the IR remote for seven seconds
Press
A until the upper LCD display reads either of the following:
SET: OUTPUT FORMAT / ANALOG RGB + DVI
SET: OUTPUT FORMAT / ANALOG RGB
Press < or > to select SET: OUTPUT FORMAT / ANALOG YPrPb
Press
Menu to return to the USER MENU
Note: ONLY select either 1920x540p or 1280x720p scanrates if the display device does
not have an available 5-wire RGBHV or D-15 VGA input connection.
If you are connecting the DVP-1080 and display device via RGBHV, and your picture
is MAGENTA, you will then need to change the displays input format from COMP
(Component) to RGB or PC.
Verify that the output/input cable(s) have not been swapped.
Verify continuity of cable terminations
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian DVP 1080 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian DVP 1080 HD in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info