494961
25
Zoom out
Zoom in
Previous page
1/34
Next page
Tr o u b l e s h o o t i n g
2 1
Connecting the processor to the display
Which output scan rate should I choose for my display?
The appropriate output scan rate selection is usually determined by the actual native pixel
density of a digital display device, or the physical CRT size of an analogue display device
(7”, 8” or 9” CRT).
Each display device will specify their individual video/computer input capabilities. All display
devices will list their specific video/computer input specifications within the User’s Manual,
and are typically located within a “Table of Supported Resolutions”, or under similar
nomenclature.
The following represent basic examples for possible output scan rate selections:
Display Type Display resolution DVP1080 scan rate
Plasma TV
1366 x 768 1366 x 768
Digital projector
1366 x 768 1280 x 720
CRT projector 7" CRT
8" CRT
9" CRT
1920 x 540 or 1280 x 720
1280 x 720 or 1440 x 960
1440 x 960 or 1920 x 1080
CRT rear screen 480 i/p, 1080i, or 720p 1920 x 540p or 1280 x 720p
Note: Occasionally, a digital display device may not actually accept the signal received
from the processor at its native pixel resolution. Choose a standard DTV signal in this
instance, such as 1280x720 (default setting), or 1920x540 (1080i equivalent).
There are sparkles appearing throughout the image when using
the DVI output
Cable length is too long to support the output resolution selected on the processor
Sparkles may occur if the resolution selected on the DVP-1080 processor has exceeded
the ability of the DVI cable to transmit all of the video data (missing bits = sparkles).
This is directly dependent upon cable quality (contact cable manufacturer regarding
length to resolution specifications).
Unassisted DVI cable lengths to 50ft (15.24m) have been achieved with resolutions of
1024p and lower.
Cable lengths of 50ft (15.24m), or greater, may require a DVI to Fibre Optic cable
connection between the processor and display for resolutions higher than 1024p;
consult Cable Manufacturer
You can also use a Meridian HDMAX 121 extender/booster at the display end to solve
problems like this. Contact your Meridian authorised dealer for details.
Can the DVP1080 output both an analogue and a digital signal
simultaneously?
Yes. Four potential SET: ACTIVE OUTPUT modes are available through the DVP-1080
SETUP MENU:
Mode Description
ANALOG RGB + DVI Both DVI OUTPUT and ANALOG OUTPUTS are active (Default
Setting)
ANALOG RGB Only ANALOG OUTPUTS are active (RGBHV and MONITOR)
DVI Only DVI OUTPUT is active (RGBHV and MONITOR out disabled)
ANALOG YPrPb Only ANALOG OUTPUTS are active (DVI output disabled)
This chapter provides suggested solutions to common problems that may occur when installing and using
the DVP1080HD.
Troubleshooting
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian DVP 1080 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian DVP 1080 HD in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info