494961
21
Zoom out
Zoom in
Previous page
1/34
Next page
C o n f i g u r i n g t h e
d i g i t a l v i d e o
p r o c e s s o r
1 7
Displaying the SETUP menu
The SETUP menu provides a series of options to allow you to configure the digital video
processor to suit your specific installation.
To display the SETUP menu
Press Menu on the remote control for seven seconds.
The display shows the first setup option on the first line of the display and the option’s
current setting on the second line of the display:
SET: NTSC SCANRATE
1280 x 720
Press > or < to step between the alternative values for the option.
Except in the case of the SCANRATE options, the value will change immediately to the
selected value.
To change the scan rate
Select the NTSC SCANRATE or PAL SCANRATE option:
SET: PAL SCANRATE
1280 x 720/50Hz
The NTSC scanrate sets the output rate when a 60Hz source is auto detected, and the PAL
scanrate when a 50Hz source is auto-detected. Check with the display device manual to
determine which output rate to choose.
To change the setting:
Press
STORE.
The display shows:
SET: ARE YOU SURE
<PRESS STORE KEY>
Press STORE again to change the setting.
To specify the active output
Select the ACTIVE OUTPUT menu option.
You can choose between
RGB + DVI, YPrPb, DVI, or RGB:
SET: ACTIVE OUTPUT
ANALOG RGB + DVI
To set the screen shape
Select the SCREEN SHAPE option:
SET: SCREEN SHAPE
WIDE SCREEN
Use this option to match the aspect ratio of your display device. The options are as follows:
Option Description
WIDE SCREEN Choose this option when using a 16:9 projector or display, or a 4:3
projector with an anamorphic lens on a 16:9 screen.
WIDE 4:3 Choose this option when using a 4:3 projector or display, but want to
show a 16:9 image (letterbox); for example, when using a 4:3 projector
on a 16:9 screen.
4:3 Choose this option when using a 4:3 projector or display.
The screen shape defaults to AUTO when in high bandwidth mode.
This chapter explains how to configure the DVP1080HD Digital Video Processor using the options on the
SETUP menu.
Configuring the digital video processor
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian DVP 1080 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian DVP 1080 HD in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info