494961
18
Zoom out
Zoom in
Previous page
1/34
Next page
O p e r a t i n g t h e
d i g i t a l v i d e o
p r o c e s s o r
1 4
To adjust the tint
TINT 50
|•••••• |
Tint is only available with composite or S-Video sources.
If the image colour still seems off balance with the tint set correctly the greyscale of the
display may need adjusting. Contact your installer for assistance.
Suggested test pattern: REVERSE COLOR BAR.
To adjust the detail
DETAIL 10
|• |
This enhances the detail in the image.
Too much enhancement will produce unnatural looking edges and ringing. The higher
quality the source, typically the less enhancement required. With poor digital sources, such
as a poorly transferred DVD or a very compressed satellite channel, reducing the detail level
can help to make compression artifacts less visible.
Suggested test pattern: DVD Movie with a close up of a face in a still frame. Adjust so the
face has detail but the edges do not look fake (such as along the bridge of the nose.
To set advanced colour
Select the ADVANCED COLOUR SYS option on the PICTURE menu:
ADVANCED COLOR SYS
NORMAL
Press > or < to toggle the setting between NORMAL and BYPASS.
Advanced colour mode activates colour edge enhancement and cross-colour suppression to
improve the image and remove certain video artifacts. This should be set to
NORMAL for
most sources.
With a few movies that contain large amounts of colour, such as animation, these
enhancements may cause colour flickering. Set the mode to
BYPASS if this occurs.
Adjusting the aspect ratio
The aspect ratio options allow you to select the proper aspect ratio of the source being
viewed.
Note that the correct screen shape must be set in the
SETUP menu during initial
installation for the settings to function properly; see
Configuring the digital video processor
,
page 17.
The following aspect ratios are available: anamorphic, 4:3, or letterbox.
To select anamorphic aspect ratio
Press Anamorphic on the remote control.
This selects the correct aspect ratio for sources formatted for widescreen displays,
sometimes called Enhanced for Widescreen.
DVD players must be set for 16:9 displays for proper screen shape, see the DVD player’s
Setup menu.
For Meridian DVD players select
16:9 Widescreen in the Display Aspect Ratio menu.
To select letterbox aspect ratio
Press Letterbox on the remote control.
This selects the proper aspect ratio for sources formatted for the letterbox screen format.
This mode can also be used with anamorphic 2.35:1 (cinema scope) sources when
combined with an anamorphic lens on a 16:9 projector. The benefit is that the full
resolution of the 16:9 display chip is used to create the active video, improving resolution
and light output. The trigger output can be programmed to control the motorised lens
attachment.
To select the 4:3 aspect ratio
Press 4:3 on the remote control.
This selects the correct aspect ratio for sources formatted for a 4:3 screen format.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian DVP 1080 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian DVP 1080 HD in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info