494961
16
Zoom out
Zoom in
Previous page
1/34
Next page
O p e r a t i n g t h e
d i g i t a l v i d e o
p r o c e s s o r
1 2
Remote control
Digital video projector
operation
The remote control operates both Meridian
DILA projectors and DVP digital video
processors.
Press
DVP or DILA to select the product
you want to control.
Point the infra-red light at the top of the
remote control towards the product.
The digital video processor has a sensor on
the front panel.
The projector may have sensors at the front
and rear; see the projector user manual
for details. In addition, you may be able to
control the projector by pointing the remote
control at the screen so the beam reflects
back to the projector.
To work reliably the angle of the beam
needs to be within ±30° of centre, and
the total distance needs to be less than 7
metres.
1 2
3
4
5
6
7
8 9
0
Bright.
Cont.
Lig ht
DVP
DILA
On
Off
Profile
Menu
Enter
DVI
Video
RGB
Colour
Tint
Detail
YCrCb
S-Video
Store
Bypass
Hide Zoom
Test
T
W
Focus Pattern
Preset
Exit
Anamorphic
4:3
Letterbox
Select processor
Navigate menus
Select projector
Turn processor/projector
to standby.
Hold down or switch
projector to cool-down
mode
Display/hide menu
Select video input
Adjust image detail
using < or >
Adjust NTSC tint
using < or >
Adjust projector focus*
Display test patterns
Zoom projector image*
* Only available with
some projectors
Adjust contrast
using < or >
Turn processor/projector on
Reset a selected menu item
to factory setting
Return from menu
Select menu item
Select aspect ratio
Adjust colour
using < or >
Display green grid signal
for focus adjustment
Hide/restore video image
Adjust brightness
using < or >
Illuminate backlight for 10
seconds
To replace the batteries
Before use, load 3 AAA size batteries into
the remote control. If the remote control
starts to function erratically, replace the
batteries.
Gently press the circular recess near the
top of the battery cover on the back of
the remote control.
Slide the cover down and off.
Insert three penlight cells by pressing
the negative terminal of each battery
against the corresponding spring and
snapping into place.
Alkaline cells types AAA, UM04 or IECR03
are recommended.
The correct orientation of the batteries is
indicated in the battery compartment.
Replace the battery compartment cover
and slide it upwards, engaging the
two tabs at the top of the cover with
the slots provided at the top of the
compartment.
Push the cover up until it clicks shut.
When correctly engaged, the cover should
sit flush with the rear of the remote control.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian DVP 1080 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian DVP 1080 HD in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info