494844
63
Zoom out
Zoom in
Previous page
1/75
Next page
56
CONFIGURING THE
DIGITAL SURROUND
CONTROLLER
You can select between sensitivities of 0.5V (most sensitive), 1.0V, 2.0V, or
2.5V (least sensitive).
If the sensitivity is set too high the input will clip the loudest passages.
The display shows, for example:
Radio 0.5V In Clip
In this case reduce the sensitivity.
If you have selected a digital source you cannot adjust the sensitivity.
The display shows, for example:
CD Not Analogue
To adjust the subwoofer crossover frequency
The digital surround controller allows you to adjust the crossover frequency
of any subwoofers between 30 and 150Hz. The crossover can be set
independently for Music, Logic, and 5.1 Movie speaker layouts. The default
is the THX standard of 80Hz. For details of which speaker layout is used by
each DSP preset see Speaker layouts, page 4.
Turn on Gain/Sub mode, as described above.
• Press < or > (remote or under the front panel) until the display shows
the current crossover frequency.
For example:
Radio Xover 80Hz
• Press A or V (remote or under the front panel) to set the crossover
frequency.
For THX loudspeaker systems you should leave the crossover setting at
80Hz.
80Hz is also the recommended setting for all movie listening. You may
prefer, however, to lower the crossover frequency for music if your main
speakers have good bass handling down to, say, 50Hz.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 861 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 861 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info