494843
35
Zoom out
Zoom in
Previous page
1/40
Next page
31
Configuring the 818
Reference Audio Core
Setting up sources
This section explains how to use Gain mode to set up
the analogue sources connected to the 818.
To turn on Gain mode
Put the 818 into standby by pressing Off (front panel
or remote).
Press and hold the Volume - key (under the front
panel) for at least five seconds.
The display shows:
Gain On
The 818 will then return to standby with Gain mode
turned on.
Gain mode adds an extra Sensitivity option to the
menus.
To turn off Gain mode
Repeat the above procedure.
The display shows:
Gain Off
To adjust the sensitivity of a source
To obtain the best signal-to-noise ratio for your
analogue sources you can adjust the sensitivity of each
input to give the highest level that does not produce
clipping.
Turn on Gain mode, as described above.
Select the source you want to adjust, with loud
source material playing.
Press < or > (remote or under the front panel) until
the display shows the current sensitivity.
For example:
Radio 2.0V In
Press A or V (remote or under the front panel) to
change the sensitivity.
You can select between sensitivities of 0.5V (most
sensitive), 1.0V, 2.0V, or 2.5V (least sensitive).
If the sensitivity is set too high the input will clip the
loudest passages. The display shows:
For example: Radio 0.5V In Clip
In this case reduce the sensitivity.
If you have selected a digital source you cannot adjust
the sensitivity. The display shows:
For example: CD Not Analogue
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 818 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info