494843
34
Zoom out
Zoom in
Previous page
1/40
Next page
30
Configuring the 818
Reference Audio Core
Choosing a standard setting
The 818 provides two standard settings, called Types,
which configure all aspects of the 818 into standard
configurations.
These standard Types are shown in the following table:
Type Label Description
1
Fixed
Fixed output, for use with Meridian
DSP loudspeakers.
2
Variable
Variable output, for use with power
amplifiers and analogue speakers.
In addition, your installer may have provided one or
more named User Types, with settings appropriate to
the configuration of equipment when your 818 was
installed.
You can reset the configuration of the 818 to any of
these Types to restore it to the state it was in when
it was installed. Note: Selecting a Type will clear any
configuration changes you have made.
To select a standard setting
Warning: this procedure will reset any
configuration changes you have made.
Switch off any power amplifiers that are connected to
the 818 and put any digital speakers into standby.
Put the 818 into standby by pressing Off (front panel
or remote).
Press and hold down Volume + (under the front
panel).
The display shows:
Type in... 3
Keep holding down Volume + for a further three
seconds.
The display shows:
Type- please wait.
Then after a short delay the display shows the current
Type.
For example:
Type 1 Fixed
Press A or V on the front panel to change the Type
number.
The display shows:
Typing, please wait.
Wait for one second, and then put the 818 into
standby by pressing Off (front panel or remote).
Switch on again to use the standard settings you
have selected.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 818 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 818 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info