494960
62
Zoom out
Zoom in
Previous page
1/70
Next page
54
Troubleshooting
Image problems
Image is dark
Is the lamp near exhaustion?
Check the Lamp Time indicator (see
Warnings
using indicator lights
, page 56) or displayed screen
message (see
On-screen display messages
, page
55). Obtain a replacement lamp from your Meridian
retailer or contact Meridian’s service department.
Video image does not appear
Is the lens cap removed?
Remove the lens cap.
Is the scaler properly connected?
Connect the scaler correctly.
Is the power to the connected devices turned on?
Turn on the power to the connected devices.
Are correct signals being output from the connected
devices?
Check that the source you are using has the correct
video input selected; DVI or HDMI.
Configure the connected devices correctly.
Are the signals of the connected devices within
operating range?
Check to ensure that they are valid input signals, and
input compatible signals accordingly.
Is the video image hidden?
Press the Hide button on the remote control.
Video image is blurred
Is the projector out of focus?
Adjust the focus using the Focus Lens setting on the
810 Scaler.
Is the projection distance too short or too long?
Set it to a correct distance. See the lens
documentation.
Colouring of the image is poor or
distorted
Are the signals of the connected devices valid input
signals?
Check to ensure that they are valid input signals, and
input compatible signals accordingly.
Is the input cable correctly connected?
Connect the input cable correctly.
Projection position on the screen has
shifted
Has the setup position of the projector been shifted?
Check the setup position of the projector.
Image disappears suddenly
Are the video signals correctly input?
Check the signals and connection.
The screen does not darken
immediately when the projection has
ended
The shutdown process is in progress
Please wait for an addition 10 seconds for the
shutdown process to complete
The quadrants of the image are in the
wrong positions
Check that the Quad DVI cables between the Scaler
and Projector and connected correctly.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 810 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info