494960
39
Zoom out
Zoom in
Previous page
1/70
Next page
31
Setting up the 810
System
Projector settings
The following table summarises the projector settings:
Setting Values Default Description
Test Pattern
Off, Colour bars,
Crosshatch 1,
Crosshatch 2,
Staircase, Ramp, Flat.
Off
Displays a test pattern.
Display Mode
Cross, Single, Double. Cross Single displays just the input from DVI 1 ; this option is useful
when connecting a source such as a PCs. Double displays
the input from DVI 1 on the left and DVI 3 on the right. Cross
displays DVI 1 top left, DVI 2 top right, DVI 3 bottom left, and
DVI 4 bottom right.
Input Levels
Standard or
Enhanced.
Standard Standard is appropriate for input levels of 0 to 255.
Enhanced is for input levels of between 16 and 235.
Lamp Power
80%, 83%, 86%, 89%,
91%, 94%, 97%, 100%.
80%
Specifies the lamp power. The lamp life will be extended at
lower powers.
Back Colour
Black or Blue. Black
Specifies the background colour.
Frame Lock
Off or On. Off
This synchronizes all video input signals for picture projection.
Flip H, Flip V
Off or On. Off, Off
Allows you to compensate for an inverted image; eg if the
projector is behind the screen.
Gamma
B, C, A. B Sets the Gamma to A: 2.2, B: 1.8, or C: 2.6. The system is
calibrated for a Gamma of 1.8.
Force Signal
1 to 6 or Off. 6
Should be set to 6 for use with the 810 scaler. When
connecting a PC directly to the projector another setting may be
required:
1: 4096x2400, None, Dual: 1 screen, Dual Link
2: 4096x2400, None, Single: 1 screen, Single Link
3: 2048x2400, 2Stripe, Dual: 2 screens, Dual Link
4: 2048x2400, 2Stripe, Single: 2 screens, Single Link
5: 2048x1200, Cross, Dual: Centre cross, Dual Link
6: 2048x1200, Cross, Single: Centre cross, Single Link
7: 1024x2400, 4Stripe, Dual: Stripes, Dual Link
8: 1024x2400, 4Stripe, Single: Stripes, Single Link
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 810 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info