494960
18
Zoom out
Zoom in
Previous page
1/70
Next page
10
Installing the 810
Projector
Names and functions of parts
Front air inlet/filter
The air inlets absorb air to cool the interior of the
projector. A filter is mounted inside the projector to
remove dirt in the air that enters through the inlets.
Clean the filter regularly (see
Cleaning and replacing the
filters
, page 48).
CAUTION: Do not block the air inlets with papers,
cloth, or soft cushions. Doing so may cause heat
to build up inside the projector and result in fire or
malfunction.
Lens cap
Fit the cap on the lens when this projector is not in use
to prevent the lens from becoming dirty.
CAUTION: Do not project images with the lens cap
attached. The lens cap may be deformed due to the
heat, or the projector may malfunction.
Lens
(Several lens options are available for this projector.)
Remove the lens cap before projection.
Adjustable feet (x 4)
Adjust the feet until the projector is level. The
adjustable range is 20 mm for each. See
Adjusting the
inclination
, page 14.
Side air inlet/filter
The air inlets absorb air to cool the interior of the
projector. A filter is mounted inside the projector to
remove dirt in the air that enters through the inlets.
Clean the filter regularly (see
Cleaning and replacing the
filters
, page 48).
Front/Right Side
Front air inlet/filter
Intake air
Intake air
Lens cap Lens Adjustable
feet
Side air
inlet/filter
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 810 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info