494960
17
Zoom out
Zoom in
Previous page
1/70
Next page
9
Installing the 810
Projector
Precautions during use
Burning-in of D-ILA device
Do not allow the same still picture to be projected for
a long time or an abnormally bright video image to be
projected.
Do not project still images with a high brightness or
high contrast on the screen for a long time. This video
image could be burnt into the D-ILA device.
Pay special attention when projecting video games and
computer program images.
Motion images such as normal video playback images
do not pose the burning-in problem.
Viewing conditions – brightness of
room
Shield the screen from direct sunlight or bright lights,
such as by using a curtain. Images are best projected
in a darkened room.
Do not view the screen for prolonged hours. Looking at
a screen continually for a prolonged time is tiring to the
eyes. Allow your eyes to rest at intervals.
Do not use this unit if the image is flickering due to the
installation conditions or environment.
Operational environment
Do not use this projector in rooms with cigarette smoke
or oily smoke. This may cause the unit to malfunction.
When mounting this projector to the ceiling check the
temperature around the projector unit. When a heater is
in use, the ceiling may reach a temperature higher than
anticipated, leading to malfunction of the unit.
Maintenance procedures
Clean dirt on the cabinet with a soft cloth. In case of
heavy soiling, soak a cloth in neutral detergent diluted
with water, wring dry and wipe, followed by wiping
again using a dry cloth.
Pay attention to the following to prevent the cabinet
from deteriorating in condition, getting damaged, or the
paint from coming off.
Do not wipe with a stiff cloth
Do not wipe with force
Do not wipe with thinner or benzene
Do not spray with volatile chemicals like insecticide
Do not allow prolonged contact with rubber or plastic
products
Removing dirt from the lens
Use commercial blowers or lens cleaning papers (for
cleaning glasses and cameras).
IMPORTANT: Do not use fluid-type cleaning agents.
This may lead to peeling of the surface coating film.
Lens surface is fragile. Avoid rubbing it hard or
knocking it.
Gauging replacement time of
components
This product contains consumable components,
such as optical components and filters, required for
maintaining the function of the product. The timing
for replacing these components varies considerably
according to the frequency and environment of use. For
details on replacement of components please consult
your authorised Meridian retailer.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 810 in the language / languages: English as an attachment in your email.

The manual is 1,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info