494955
34
Zoom out
Zoom in
Previous page
1/133
Next page
Defining your own presets
27
The digital surround processor provides sophisticated treble and
bass controls, to allow you to adjust the broad balance of the
system to correct for the acoustics of your listening room, or for
a misbalanced recording. The controls are more subtle than
conventional tone controls, and take advantage of digital signal
processing techniques to provide a more natural adjustment of
the frequency response. You can also change the absolute
phase of the signal, to compensate for recordings which are out
of phase.
In each case all the outputs of the digital surround processor are
given the same adjustment, to ensure a correct surround effect.
If you have a Meridian DSP loudspeaker the bass and treble
controls appear on the 568.2 but adjustment is performed in the
speaker; for more information see the relevant loudspeaker guide.
To change the treble
Press > or < (remote) until the display shows the current
treble.
For example:
Treble +1.5
Press A or V (remote) to change the treble.
The treble control tilts the frequency of the response over the
entire frequency range to make the sound brighter or dimmer. It
can be adjusted between ±10dB in 0.5dB steps. Normally
settings between +1.0 and -2.0 will give the most natural results.
To change the bass
Press > or < (remote) until the display shows the current bass
setting.
For example:
Bass +0.5
The bass control allows you to adjust the bass response in the
room by ±5dB in 0.5dB steps. Normally settings between +3.0
and -2.0 will give the most natural results.
Press A or V (remote) to change the bass.
To change the absolute phase
Press > or < (remote) until the display
shows the phase; for example:
Phase +
Press A or V (remote) to change the phase.
Changing treble, bass, or phase
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 568.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 568.2 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info