494955
32
Zoom out
Zoom in
Previous page
1/133
Next page
Defining your own presets
25
Changing the DSP parameters
Each DSP preset provides a series of parameters that you can
vary to customise its behaviour to your specific requirements.
For example, most presets provide Balance and Depth
parameters which alter the characteristics of the sound.
For each of the built-in DSP presets these parameters are set to
standard values, designed to give the best sound in typical
listening conditions and with most source materials. Each time
you select a different DSP preset the parameters are reset to
these standard values, even if you have previously altered them.
You can save the changes you have made to one or more DSP
parameters in place of the original DSP preset. Alternatively you
can create a new user-defined DSP preset, with a name of your
choice. User-defined presets appear in the list of DSP presets
after the built-in ones. See Defining your own presets, page 23.
Standard parameters
All DSP presets (except Mono and Direct) provide the standard
parameters shown on the next page.
Individual DSP presets provide additional parameters, to allow
you to adjust specific features provided by that preset. For full
details refer to DSP presets, page 37.
To change a DSP parameter
Make sure the menus are unlocked; see To unlock the menus
opposite.
Press > or < (remote) until the display shows the name of the
parameter you want to change.
For example:
Treble +1.5
Press A or V (remote) to change the value of the parameter.
As you change the value you will be able to hear the effect on
the sound, and the display will show the current value.
After a short delay the display will revert to the normal display of
DSP preset and volume.
Using a Meridian DVD player
If your system includes a Meridian DVD player you should set
the Meridian DVD present setup option; see Changing the
setup options, page 101. The menu keys on the remote will then
operate the DVD player menus, and you can change 568.2 DSP
parameters using Function >, Function <, Function A, and
Function V.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 568.2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 568.2 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info