494939
34
Zoom out
Zoom in
Previous page
1/40
Next page
Setting up the analogue controller
30
This section describes problems you may encounter when using
the analogue controller, and includes suggested solutions.
If these suggestions fail to cure the problem, please contact
your Meridian dealer for further assistance.
No lights are displayed when
switching on
Check that your AC power supply is connected correctly.
Check that the ON OFF switch on the back panel is in the ON
position.
Check that the fuse on the analogue controller back panel and
the fuse in the unit’s power plug have not blown; see To
change the mains fuse, page 32.
There is hum on the LP input
The LP input is the most sensitive input on the analogue
controller.
Check that the tone arm is connected to the technical ground
of the analogue controller.
Check that the tone arm is connected to the power ground in
the turntable.
If you are using a magnetic pickup, check that there is not
another piece of equipment too near to the turntable or the
left-hand side of the analogue controller. If so, re-position the
equipment to cure the problem.
There is hum on other inputs
Check your other equipment.
Consult your dealer.
Troubleshooting
34


Need help? Post your question in this forum.

Forumrules
1

Forum

meridian-502

Reset search

  • My Meridian 502 preamp has no power. I have replaced fuse and still no power. Fuse has not blown. Submitted on 16-2-2022 at 18:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 502 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info