494939
24
Zoom out
Zoom in
Previous page
1/40
Next page
Customising the analogue controller
20
The 502 Analogue Controller allows you to program the level of
each source independently, to suit your other equipment, so that
when you switch between sources the volume stays the same.
When you are programming levels the analogue controller
operates as a preamplifier with a fixed volume setting equivalent
to 65. This level is chosen to be comfortably loud on average
sources. You can switch between sources and adjust the
relevant input levels to achieve the setting you want.
You can increase the sensitivity of any source by up to 30 steps
of 1dB. The loudest source, usually CD, should therefore be
chosen as the reference.
Programming levels
To balance input levels
Switch off any power amplifiers that are connected to the
analogue controller.
Switch off the analogue controller, using the power switch on
the back panel.
Switch on the power again while holding down the Mute key
on the front panel.
The display will show:
Gain Set
Release the Mute key.
The display will show the
normal standby condition:
.
Select the source that sounds loudest and make it your
reference.
Switch to another source in the usual way.
24


Need help? Post your question in this forum.

Forumrules
1

Forum

meridian-502

Reset search

  • My Meridian 502 preamp has no power. I have replaced fuse and still no power. Fuse has not blown. Submitted on 16-2-2022 at 18:24

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Meridian 502 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Meridian 502 in the language / languages: English as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info