657615
127
Zoom out
Zoom in
Previous page
1/139
Next page
123
7. Check shift/brake levers for burrs and
sharp edges in the clamping areas. Remo-
ve the clamping bands completely from the
road handlebar levers before sliding them
onto the handlebar.
To prevent scratches in the carbon, never
make rotational movements when fitting
the levers.
Once the clamping bands are positioned
accurately on the handlebar, mount the
levers and tighten the clamps.
Make sure to also read the instruc-
tions of the shift/brake lever manu
-
facturer before the mounting.
8. Bring the levers into their final position
and tighten the clamps to the lower limit
of the recommended torque setting. If the
levers are still not tight enough, increase
the torque. Never exceed the recommen-
ded maximum torque of the component
manufacturer.
With regard to the necessary torques, see
chapter 29. Recommended torques for
bolted connections”
. If the torques for two
components to be combined differ, make it a
rule to tighten them to the lower torque.
Never exceed the maximum torque
settings that are recommended by
the stem, handlebar or fork manufacturers.
Retighten all bolts after the first 100 - 300
km with the prescribed torque and then
again every 2,000 km.
Technical data
Mountain bike
Handlebar:
Clamping area (sleeve):
Standard: 25.4 mm
Oversized: 31.8 mm
Stem:
Handlebar clamping area:
Standard: 25.4 mm
Oversized: 31.8 mm
Fork steerer tube clamping area:
28.58 ± 0.05 mm (1 1/8“)
Road bike
Handlebar:
Handlebar clamping area:
Standard: 26 mm
Oversized: 31.8 mm
Stem:
Handlebar clamping area:
Standard: 26.0 mm
Oversized: 31.8 mm
Fork steerer tube clamping area:
28.58 ± 0.05 mm (1 1/8“)
28.4 Carbon handlebars and stems
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Merida 2008 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Merida 2008 in the language / languages: English as an attachment in your email.

The manual is 5,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info