494012
73
Zoom out
Zoom in
Previous page
1/226
Next page
71
ENGLISH
71
Problem Cause Solution
The brewing unit
can no longer be
reinserted after
removal.
The brewing unit is not
properly locked.
Check whether the handle
for locking the brewing unit is
correctly engaged.
The drive is not in the
proper position.
Switch the appliance off and
on again, and then press
the buttons for one- and
two-cup dispensing
simultaneously for longer than
2 seconds. The drive moves
into position. Then reinsert the
brewing unit and make sure it
is correctly locked into place.
The buttons for
one- and two-cup
dispensing
ash alternately with
the ON/OFF button
.
The brewing unit is
missing or is not properly
inserted.
Insert the brewing unit properly.
The brewing chamber is
overlled.
Switch off the appliance and
switch it on again via the ON/
OFF button (repeat if
necessary) until standby mode
is displayed.
Continuous ashing
of all buttons
System error Switch off the appliance and
switch it on again via the ON/
OFF button ; if this does
not solve the problem, send
the appliance to the service
department.
Please contact the Melitta
®
hotline, if the above mentioned solutions do not help to
solve the problem: +49 571/ 86 1900.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Melitta Caffeo Solo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Melitta Caffeo Solo in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Melitta Caffeo Solo

Melitta Caffeo Solo User Manual - German - 15 pages

Melitta Caffeo Solo Additional guide - Dutch - 2 pages

Melitta Caffeo Solo Additional guide - Dutch - 2 pages

Melitta Caffeo Solo User Manual - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info