• Checkregularlythatneitherthecord
nor plug is damaged and do not use if
there is any damage, or if it has been
droppedontheoor,droppedinwater
or damaged in any other way.
• Iftheappliance,cordorplughave
been damaged, have the appliance
inspected and if necessary repaired
byanauthorisedrepairer.Nevertryto
repair the appliance yourself. Please
contact the store where you bought
the appliance for repairs under the
guarantee.Unauthorisedrepairsor
modicationstotheappliancewill
invalidate the guarantee.
KEY TO THE MAIN COMPONENTS OF
THE APPLIANCE
1. Hanging loop
2. Airintake
3. Handle
4. ON/OFFbutton
5. Brush lock button
6. Airoutlet(underneathaccessory)
7. Brush
USING THE APPLIANCE
1. Fit the brush (7) to the appliance air
outlet (6), pressing down until it clicks
into place.
2. StarttheappliancebyturningtheON/
OFF button (4) to the desired setting,
position 1 - cool, position 2 - hot/Low
speed, position 3 - hot/high speed
3. Dry and set hair as described below.
4. SwitchoffbypushingtheON/OFF
buttontothe“0”position.Switchoff
and remove the plug from the socket
onceyouhavenishedusingthe
appliance.
5. Remove brush by pressing the lock
button (5) in and extract the brush
from the appliance.
6. The appliance can be hung up using
the loop (1) at the bottom of the
handle.
Using the brush
Hair should be clean before using the
appliance. Blowdry the hair or wait until
it is almost completely dry. The hair
should be slightly damp when using the
appliance. If it is wet, it may frizz or be
difculttostyle.Neverapplywax,gel,
mousse or any other hair product directly
to the brush.
1. Brush hair with an ordinary brush or
comb while still wet.
2. Roll a lock of hair around the brush.
The larger the amount of hair treated
at a time, the looser the curls will be.
3. Switch appliance on, allow hair lock to
dry while rolled up on the brush.
4. Unrollthelockofhairfromthebrush.
The hair will now curl.
CLEANING
When cleaning the appliance, you should
pay attention to the following:
• Removeplugfromthemainssocket,
and allow the appliance to cool down
before cleaning it.
• Removedustanddirtfromthe
appliance’s air intake (2) using a
vacuum cleaner or soft brush.
• Neversubmergetheappliancein
water and make sure no water enters
the appliance.
• Cleantheappliancebywipingitwith
adampcloth.Alittledetergentcan
be added if the appliance is heavily
soiled.
• Donotusescouringpads,steelwool
or any form of strong solvents or
abrasive cleaning agents to clean the
appliance, as they may damage the
external surfaces of the appliance.
• IMPORTANT!Allowtodrycompletely
after cleaning. Do not use the
appliance if it is damp.
1.
2.
3.
4.
5.
6.
7.
