479169
35
Zoom out
Zoom in
Previous page
1/56
Next page
The correct skew setting varies depending on your geographic location, since the orientation
of your antenna to the satellite changes as you move. For complete details about adjusting the
LNB’s skew angle, see “Appendix A – How to Set the Skew Angle”
The antenna system is easy to use. Under normal conditions, operation of the antenna
requires no intervention from the user. Antenna unit initialization and satellite acquisition is
completely automatic.
Receiving Satellite TV Signal..20
Turning the System On/Off.20
Changing Channels....21
Watching TV...21
Switching between Satellites...21
Operating the IDU....22
Receiving Satellite TV Signals
Receiving Satellite TV SignalsReceiving Satellite TV Signals
Receiving Satellite TV Signals
Television satellites are located in fixed positions above the Earth’s equator and beam TV
signals down to certain regions of the planet. To receive TV signals from a satellite, you must
be located within that satellite’s unique coverage area. To check it, see “Appendix B –
Satellite Coverage Map” In addition, since TV satellites are located above the equator, the
antenna must have a clear view of the sky to receive satellite TV signals. Anything that stands
between the antenna and the satellite can block the signal, resulting in lost reception.
Common causes of blockage include lighthouses, boat masts, trees, buildings, and bridges.
Heavy rain, ice, or snow might also temporarily interrupt satellite signals.
Turning the System On/Off
Turning the System On/OffTurning the System On/Off
Turning the System On/Off
Since power to the antenna system is controlled by the IDU, you can turn the antenna on or
off by applying/removing operating power to the IDU.
Turning on the System
Follow the steps below to turn on your antenna System.
1. Make sure the antenna has a clear view of the sky.
2. Turn on your satellite TV receiver and TV.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat Shipman WSTA-VM250P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat Shipman WSTA-VM250P in the language / languages: English, German as an attachment in your email.

The manual is 7,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info