479172
8
Zoom out
Zoom in
Previous page
1/23
Next page
Setting the LNB skew angleEquipment and cable installation
This oers a general explanation of how to install the IDU and satellite receiver pro-
perly to the inside of vessel connecting with coaxial cable.
Signals transmitted in vertical(red) and horizontal(blue) wave oset exactly 90º from
each other. Since linear satellite signals are oriented in a precise cross pattern, the
Seaman antennas receiving element, called an LNB (low-noise block) must be orien-
ted in the same way to optimize reception. This orientation adjustment is referred to
as the LNB’s “skew angle. Figure 1-4 illustrates how skew determines the amount of
signal the LNB collects. The more signal, the better the reception.
bad skew Good skew best skew
The correct skew setting varies depending on
your geographic location, since the orientati-
on of your antenna to the satellite changes as
you move. For complete details about adjus-
ting the LNB’s skew angle, see Appendix A –
How to Set the Skew Angle
1. The Coaxial cable is routed from the antenna to the IDU inside the vessel.
2. After Once deciding where to place the IDU and satellite receiver, make sure
that both units are placed in a dry and protected area.
3. The IDU and satellite receiver should be placed away from any heat source
and in an area with proper ventilation.
4. Ensure that there are at least 3cm of space around both units for ventilation
and connection of cables. Do not stack the units on top of each other.
5. The following describes the basic wiring congurations for the Seaman an-
tenna system.
• Connect the Coaxial cable to the Seaman antenna port on the back of the
IDU
• Connect one end of the supplied coaxial cable to the receiver port on the
back of the IDU
• Connect the other end of the coaxial cable to the satellite receiver
Figure 2-3 Satellite signals
Figure 2-3 Satellite signals
LNB signal collector
satellite signal
ENGLISH ENGLISH
14
15
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat Seaman 45 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat Seaman 45 in the language / languages: English as an attachment in your email.

The manual is 3,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Megasat Seaman 45

Megasat Seaman 45 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info