551330
30
Zoom out
Zoom in
Previous page
1/35
Next page
Installation and Operation Installation and Operation
ENGLISH ENGLISH
24
25
Other
1. LNB-voltage:
Select OFF / ON.
2. Channel type:
Select Free, scrambled (cryptographically) or completely.
3. channel switching:
Choose between freeze or black screen.
4. Auto-Standby:
Choose between ON / OFF. if you have chosen to „On“, the unit automatically after 3
hours in the standby mode when no operation is performed on the receiver.
5. Time in Standby:
Select „On“ to enable the time in standby mode it is indicated on the display.
Tools
System Information
Press the OK button. It displays the system
information.
Factory Setting
Press the OK / List button to get back to
factory settings. Confirm with Yes“, all
settings are reset to the factory condition.
Do you want to cancel the operation, select
„No“.
Common Interface
Here you can find information about the in-
serted CI module. If no CI module inserted,
this option has no effect.
Cardreader
See step „Common Interface“
Upgrade by USB (Software-Upgrade
with a USB-device)
This menu is only active when a USB device
is inserted.
1. Use the + / - buttons to „Upgrade Mode“
and select „Upgrade File“ for the file.
2. Confirm your selection by clicking „Start,
then the upgrade process started. NE-
VER turn off the power when during this
process!!!
1. Press the OK button to go to the tools
menu.
2. Move the cursor with the „PR + / PR-“ up/
down to select the submenu.
3. Confirm your choise with OK.
4. Press the EXIT or the MENU button to
return to the main menu.
Update modes File Properties
Allcode: file ending with „abs“
Main Code: file ending with „am“
DefaultDB: standard channel list
UserDB: User channel list
Flash Config:
keydb:
Backup: file ending with „abs“
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat HD 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat HD 810 in the language / languages: English, German as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info