551330
28
Zoom out
Zoom in
Previous page
1/35
Next page
ENGLISH ENGLISH
20
21
Installation and OperationInstallation and Operation
TP-List (Transponderlist)
1. Use the +/- keys to select the desired
satellite.
2. Select the transponder with the PR +/PR-
buttons that you want to modify. Then
press the RED button.
Frequency, Symbolrate: Increase or de-
crease the value with the + / - buttons or
enter the value directly with the numeric
keys (0-9).
Frequency range is 3000-13450
Symbol rate range is 1000-45000.
If you enter a value outside the allowable
range, the original value will be valid.
Polarity: then use the +/- button in the
horizontal or vertical polarity. Confirm by
clicking on „SAVE“.
3. Press the GREEN button to add a trans-
ponder. Follow the above instructions.
4. Press the yellow button to delete the
transponder. Confirm your choice in the
window that appears with Yes“ or press
„NO“ to cancel.
5. Press the BLUE button to scan a transpon-
der. In the resulting window contains the
following options:
6. Only FTA, Channel search,
Network Search:
Set the required values with the +/- but-
tons. Start the search by pressing the OK
button.
1. Press the OK button to enter the system settings.
2. Move the cursor with the „PR + / PR-“ up/down to select the submenu.
3. Confirm your selection with OK.
4. Press the EXIT or the MENU button to return to the main menu.
Language
1. Select the language with the OK button.
Use the +/- buttons to select the desired
language from the list, move the cursor
up/down with the PR + / PR- to set other
options in the same way.
2. Save the settings and exit the menu by
pressing the MENU or the EXIT button.
TV-System
Move the cursor up/down with the PR + /
PR-, with + / -, it is possible to change the
settings with immediate effect.
1. Video Resolution: Changes the screen
resolution (watch out for the max resolu-
tion of your TV.)
2. Aspect mode: the screen ratio changes to
Auto, 4:3 PS, 4:3 LB, or 16:9
3. Video output: select the options RGB and
CVBS.
4. Digital Audio Out: select the options
LPCM Out and BS out.
Display Setting
Regulate here with the + / - buttons various settings in order to get a better picture to
your TV. The following options are available:
Brightness, contrast, saturation, color, sharpness.
System Setup
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Megasat HD 810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Megasat HD 810 in the language / languages: English, German as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info