477209
41
Zoom out
Zoom in
Previous page
1/154
Next page
GB
35
Application
You can de ne a normal program (U-01) and a burst program (U-02) yourself
in TENS mode for individual therapy. The following parameters are saved in
the process:
Duration of the therapy
• Frequency
• Pulse width
1. Select TENS therapy mode (see page 33).
2. Select one of the user programs U-01 or U-02 (see page 33).
3. Brie y press the button “Set”. The display for the therapy duration will blink.
4. With one of the controls or set the desired therapy duration (10 to 90
minutes).
5. Brie y press the button Set. The display for the frequency will blink.
6. Set the desired frequency with one of the controls or :
Normal program (U-01): 2 to 120 Hz
Burst program (U-02): 0.2 to 5.0 Hz
7. Brie y press the button Set”. The display will now display the pulse width.
8. With one of the controls or , set the desired pulse width (50 to 300 S).
9. Brie y press the button “Set”.
This program has now been saved and can be used like a preset program (see
page 33 and 34).
In EMS therapy mode, you can de ne a program yourself and save the follow-
ing parameters:
• Therapy duration
• Frequency
• Pulse width
Increase/decrease time – Current intensity increases from zero to the de-
ned value or drops back to zero during this time.
Continuous time – Current intensity is held.
Pause time – pause for recovery.
Current intensity
Time
Ramp time
Ramp time
Continuous time
Relax time
Drop time
1. Select EMS therapy mode (see page 33).
2. Select the user program U-01 (see page 33).
3. Brie y press the button Set. The display of the therapy duration will
blink.
4. With one of the controls or , set the desired therapy duration (10 to 90
minutes).
5. Brie y press the button Set. The display for the frequency will blink.
6. With one of the controls or set the desired frequency (2 to 120 Hz).
7. Brie y press the button Set. The display will now show the pulse
width.
De ne TENS
program
De ne the EMS
program
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana TDP 88310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana TDP 88310 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info