477209

Medisana TDP 88310 Manual

40
Zoom out
Zoom in
Previous page
1/154
Next page
GB
34
Application
With the controls ቩ (channel 1, left connection) and ቢ (channel 2, right con-
nection) you set the current intensity from 1 to 60 mA in increments of 1 mA.
• Increase the current intensity: Turn the control up.
• Reduce the current intensity: Turn the control down.
The current strength appears on the display panel with the large numbers
(channel 1) and ቯ (channel 2). When the current is activated, the therapy time
ታ starts counting down.
Carefully increase the current intensity until you notice a tingling sensation from
the applied current. Observe the instructions of your doctor or therapist in the
process.
• For pain relief, only increase the intensity so that it is still pleasant. The cur-
rent should not in any case be painful.
• To relax your muscles, increase the intensity until slight twitching under or
around the electrodes results. In no case, should the tensing of the muscles
be painful.
• Stop using the device if it is no longer pleasant or if you experience pain.
Automatic deactivation
The device will deactivate the current from a current intensity of 10 mA if the
electrodes are not properly applied to the skin or are not connected at all.
Automatic locking
If you do not operate the unit for 10 seconds after beginning the therapy, the
display panel light will deactivate and the control elements will be locked to
prevent accidental changes to the settings. The lock is indicated by the key
symbol ት “
” next to the program number.
• To unlock the device, push the button ቨ “P” for approximately three sec-
onds.
You can interrupt therapy in progress at any time (also when the device is
locked) by pushing the button ቤ “ ”.
The program will stop automatically once the therapy time has elapsed.
• Turn off the device by briefl y pressing the button ቤ “
”.
• Remove the electrodes, if applicable, clean them (see page 47) and stick
them back on the carrier paper.
Select the cur-
rent intensity
End
therapy
… 40 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana TDP 88310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana TDP 88310 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info