477185

Medisana BTS 47728 Manual

32
Zoom out
Zoom in
Previous page
1/150
Next page
26
GB
4 Application / 5 Miscellaneous
5.1
Cleaning and
maintenance
The device doesn’t turn on after the ON/OFF switch is pressed.
The batteries are not inserted correctly. Insert the batteries correctly.
The batteries are empty. Replace the batteries.
The muscle only contracts a little although the intensity is set high.
The battery is almost empty. Replace the battery.
The electrodes are worn out / don’t stick properly. Order new electrodes
from MEDISANA.
The electrodes are placed too close together. Both electrodes from a single
patient lead are to be placed as far away as possible from each other on
one muscle.
Unpleasant feeling where the electrodes are placed.
The electrodes are poorly placed. Check the placing of the electrodes
according to the instructions for use.
The electrodes are worn out / don’t stick properly. Order new electrodes
from MEDISANA.
A pair of electrodes doesn’t emit any stimulus.
The intensity level of the exit channel is set at zero (0). Increase the
intensity.
The cables are not inserted correctly. Check whether all the cables are ins
erted firmly in the connector plugs.
One cable is faulty. Insert a different cable in the connector socket. If it
works the first cable is faulty and should be exchanged.
One plug is faulty. Insert the cable in a different connector socket. If it
works, the plug is faulty. Bring the device to your specialist dealer.
• Remove the batteries before cleaning the unit.
• Never use strong detergents or hard brushes.
• Clean the unit using a soft cloth lightly moistened with a mild soapy
solution. Never use abrasive cleaning agents or alcohol. Do not allow any
water to get into the unit. Do not use the unit again until it is completely dry.
• Do not expose the device to direct sunlight or to high temperatures and
protect it from dust, dirt and damp.
• Store the electrodes between applications on the protective film in the re-
sealable storage pouch in a cool dry place.
• The effectiveness of the electrodes gradually subsides after 20–30 applica-
tions due to skin deposits in the gel. To maintain the adhesiveness, hold the
electrodes under cold running water for a few seconds and then shake them
dry. Before using the electrodes again, leave them on the protective film for
at least 8 hours.
• Remove the batteries from the unit if you do not plan on using it again
anytime in the near future. Otherwise, the batteries may start leaking.
4.5
Errors and repair
5 Miscellaneous
… 32 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana BTS 47728 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana BTS 47728 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info