477185

Medisana BTS 47728 Manual

26
Zoom out
Zoom in
Previous page
1/150
Next page
20
3 Getting Started
GB
Press the battery lid
on the back of the device using your thumb and slide
it away from the battery compartment. Remove the battery compartment lid.
Insert the three delivered batteries (type AA, 1.5 V, mignon). Pay attention to
the polarity of the batteries as indicated in the diagram in the battery compart-
ment. Put the battery compartment lid back on and slide it back until it locks
back in.
When the batteries become weaker, the battery symbol
on the display
lights up. If the device does not go on after pressing the ON/OFF switch
,
please insert new batteries.
WARNING BATTERY SAFETY INFORMATION
• Keep away from children! • Do not recharge!
• Do not short-circuit! • Do not throw into fire!
There is a danger of explosion!
• Do not dispose of old batteries with your household waste,
but dispose of them at a battery collection station at a
recycling site or in a shop!
The device has four exit channels with connection sockets
for the patient
leads.
Patient lead
The patient lead has a device plug
attached at the end and branches into
two ends with one red and one white connector socket
for the connection
to the electrodes
or
. (the colour of the sockets has no meaning for the
electrode connection.)
• Please connect the patient lead
first with its device plug
into the
connection socket
in the device.
• Plug the electrode plugs into the free red and white connector sockets
at
the other end of the patient lead.
• If you use all 4 patient leads
, you can connect exactly 8 electrodes to the
device.
Multiple cable
Alternatively you can also use a multiple cable
together with two patient
leads
.
A multiple cable has the device plug
at one end and branches in two ends
with connector sockets
for the patient leads.
• Insert the multiple cable
with the device plug
into the connection socket
on the device first.
• Then connect two patient leads
with the multiple cable
. Insert the
patient lead device plug
into the multiple cable
connector sockets
.
• Then insert the electrode plugs
in the free red and white connector sockets
on the patient lead
.
• Using one multiple cable
with two patient leads
you can thus connect
exactly two pairs of electrodes (4 electrodes in total) each to one connection
socket
on the device.
3.1
Inserting/
changing
batteries
3.2
Connecting the
electrodes
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana BTS 47728 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana BTS 47728 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info