537908
18
Zoom out
Zoom in
Previous page
1/98
Next page
14
3 Operating
GB
After switching on the device, the MEDISANA ACS/ACP is always set at the
lowest level of intensity (basic setting). For certain acupuncture treatments,
however, higher intensities may be necessary.
You can change the effective intensity before or during stimulation. It is recom-
mended, however, not to adjust the intensity until stimulation is applied, since
different areas of the body vary in sensitivity and also because different people
experience the electric impulse subjectively.
When the device is on, press the intensity button
on the plus sign (+) re-
peatedly until you have reached the desired intensity. In the display
you will
see that the light display moves one step further each time the button is
pressed.
When the last LED is illuminated, the device is set at the highest intensity. If you
press the intensity button
on the minus sign (-), the intensity is reduced step
by step down to the lowest intensity (foremost LED).
NOTE
The intensity is experienced very differently at different points
of the body. Before changing the acupuncture point, it is
therefore recommended to always reset the intensity to the
lowest level!
With the MEDISANA ACS/ACP you will receive an acupuncture tip
, an ear-
phone
(ACP only) and an external electrode with cable
(ACP only).
For the MEDISANA ACS, the earphone and external electrode (item no.
81650) are available as an accessory set.
Acupuncture tip
The additional acupuncture tip
has a finer and very narrow tapered end,
enabling even more efficient stimulation of the acupuncture point. This can be
especially useful in searching for, finding and stimulating points located very
close together, e.g. in the ear. Simply place the tip on the device. Make sure
that it is seated securely and has contact with the device.
Earphone (ACP only)
The earphone
can be connected to the MEDISAN ACS/ACP by means of
the jack
. Now the acoustic signal can only be heard through the earphone.
NOTE
Remember to switch off the device after completion of the
treatment. If you have worked with the earphone and set it
aside with the device, you can tell that the device is switched
on only by means of the illuminated LED
.
The battery consumption increases if you leave the
MEDISANA ACS/ACP switched on unnecessarily.
3.2
Adjusting the
intensity
3.3
Using the unit’s
accessories
GA_ACS_ACP_10spr_FINALaktualisiert.qxd:ACS 05.02.2007 8:14 Uhr Seite 14
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana ACS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana ACS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info