537908

Medisana ACS Manual

17
Zoom out
Zoom in
Previous page
1/98
Next page
13
GB
3 Operating
Apply the tip to the skin with light pressure - in the approximate area where
the acupuncture point should be located (see accompanying book). When you
begin searching, the audio signal will become brighter, and one or more LEDs
will light up on the display the closer you come to an acupuncture point. Search
for the point with the tip until the audio signal is at its brightest and the most
diodes
are illuminated.
NOTE
Sometimes acupuncture points are located very close to one
another. In order to find the right point for the desired
treatment, always refer to the accompanying acupuncture
book or specialized literature.
Once you have found the acupuncture point, press the stimulation button
with your index finger and keep it depressed. The audio signal ceases and the
LED
begins blinking; at the same time the first LED in display
blinks con-
tinuously. You are now treating the acupuncture point with the lowest electric
current (basic setting). If you wish to increase the intensity, it is recommended
to keep the tip
on the acupuncture point and to change the intensity set-
ting (see also "Adjusting the intensity"). As soon as you release the button
,
the stimulation ceases and the device returns to search mode. Therefore you
yourself determine how long the electrical impulses are transmitted.
By means of an internal clock the MEDISANA ACS/ACP can be set for 30
seconds or 60 seconds of stimulation using button
. The set time is retained
until it is changed by pressing the button
or until the device is switched off.
In the basic setting, as soon as you turn on the device, the manual mode is
always activated first.
Before searching for the acupuncture point, set the desired time by pressing
the button
: press once for 30 seconds, and press again for 60 seconds. The
LED
displays the respective setting.
Search for the acupuncture point (see "Search mode") and briefly press the
stimulation button
once. The LED
begins to blink. Since you do not have
to keep the stimulation button
depressed, you can comfortably hold the
device on the acupuncture point with light pressure.
After the set time has expired the device returns to the search mode. Since the
time setting is retained, you can stimulate the point again for the same set time
by again briefly pressing the stimulation button
.
3.1.2
Search mode
3.1.3
Manual treatment
3.1.4
Treatment with
automatic timer
GA_ACS_ACP_10spr_FINALaktualisiert.qxd:ACS 05.02.2007 8:14 Uhr Seite 13
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medisana ACS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medisana ACS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info