11
GB
3
Operating
3.6
Setting the
convenience
functions
Operating time:
Level 1 when filled with 1,3 litres of water: approx. 20 hours.
Level 2 when filled with 1,3 litres of water: approx. 30 hours.
The water tank in the MEDISANA Intensive Humidifier Ultrabreeze features an
internal illumination unit that can be activated with a simple press of the
LIGHT button
. The symbol for lighting appears in the display. A blue
light appears. Press the button
a second time and a red light appears, press
the button a third time and a green light appears. Press the LIGHT button
a fourth time and the three colours (blue/red/green) change one after the other
at intervals of 10 seconds. Two colours light up at the same time when they
are changing. Press the button
a fifth time to select a colour for a certain
time of day:
Midnight - 8 am - green light
8 am - 4 pm - red light
4 pm - midnight - blue light
Press the LIGHT button
a sixth time and the lighting switches off. The
lighting symbol disappears.
The lighting can be used independently from the nebulizer and the fan, such
as for night illumination.
When the unit switches off automatically, the illumination remains on. The
intensity of the light decreases when the nebulizer is activated.
Your MEDISANA intensive air humidifier Ultrabreeze has three convenient
features:
a clock display,
an
integrated clock timer and an alarm function.
Set the current time, to use the Ultrabreeze as a regular clock and as an alarm
clock with the alarm function
.
The integrated clock timer enables you to switch your air humidifier on and off
automatically at a certain time.
Setting the clock and alarm time is done one after the other in one setting pro-
cedure. If you do not make any settings or you want to skip them, keep pressing
the SET button
until you come to the next setting mode. The setting mode for
the alarm clock is shown by “ON” or “OFF” and for the alarm by . If you do
not press any button for 10 seconds during the setting procedure, the setting
mode ends.
Press the SET button
once to get the setting mode for the clock. “00.00”
flashes in the display. Keep pressing the hours button
until the current hour
is displayed. Proceed in the same way for the minutes button
for setting the
minutes.
3.5
Illumination
Setting
the time