446411
113
Zoom out
Zoom in
Previous page
1/175
Next page
EN-26
TIP
The hem can be inserted in the hemming foot more easily if you
hold the end of the fabric at a slight angle.
Before you start sewing, fix the hem with safety pins or iron down
the start of the hem.
For this work, you need to use suitable materials and have some ex-
perience in order to obtain the best results.
Darning
Attaching the darning plate
For some sewing work, e.g. sewing on buttons, hooks and eyes, as
well as darning and embroidering, the material must not be fed au-
tomatically and you must be able to control the feeding of the ma-
terial yourself.
In these cases, you must attach the darning plate included in the ac-
cessories.
Raise the sewing foot lever (15) and turn the hand wheel (10) to
raise the needle to its highest position.
Now push both pins of the darning plate into the openings on
the needle plate (19) until they click into place, as shown in figu-
res 1 and 2.
To remove the darning plate again, you simply need to lift up
one of the corners.
Darning
Remove the sewing foot holder and select the normal lower
thread tension.
The upper thread tension should be somewhat lower than usual.
If necessary, you can place a piece of fabric under the damaged
area.
Place the material under the needle and lower the sewing foot
lever (15) to apply the thread tension.
Begin sewing by pushing moving the fabric forwards and back-
wards by hand.
Repeat until the damaged area has been completely filled with
parallel stitches.
If necessary, you can darn over these stitches with stitches at
right angles to them, as you do when darning by hand.
TIP
During darning, the fabric must be taut. If the damaged area is lar-
ge, it is advisable to use an embroidery frame (available from specia-
list retailers) to keep the material taut.
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD11836 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD11836 in the language / languages: English, German, Portuguese, Spanish as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medion MD11836

Medion MD11836 User Manual - German - 42 pages

Medion MD11836 User Manual - Dutch - 44 pages

Medion MD11836 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info