446411
112
Zoom out
Zoom in
Previous page
1/175
Next page
EN-25
EN
Sewing in zips
Use the zip sewing foot.
Depending on which side of the zip band you are sewing, the se-
wing foot must always be on the fabric.
For this reason, the sewing foot is attached on either the left-hand
or right-hand side, and not in the middle like all other sewing feet.
Raise the sewing foot and needle to its highest position to switch
the sewing foot.
Place the zip on the fabric and place the workpiece in position
under the foot.
To sew the right-hand side of the zip, attach the zip sewing foot
so that the needle sews on the left-hand side (1).
Sew the right-hand side of the zip, creating the stitches as close
as possible to the teeth. (1)
Sew the zip in with a bridge around 0.5 centimetres below the
teeth.
To sew the left-hand side of the zip, change the foot position on
the sewing foot holder.
Proceed in the same way as for the right-hand side of the zip (2).
Before the foot reaches the slider on the zip band, lift the foot up
and open the zip, keeping the needle in the material. (3)
Sewing in a drawstring
You can also use the zip sewing foot to sew in drawstrings, as illu-
strated.
Fold the fabric over once to create a drawstring tunnel and then
sew along the drawstring, making sure the zip sewing foot is be-
hind the drawstring.
Hems
You can use the roll hem/hemming sewing foot to easily hem fine
to medium materials, e.g. blouses, silk scarves and flounces. Hem-
ming using the roll hemmer stops the edges from fraying and crea-
tes a clean, durable edge.
Raise the sewing foot and needle to its highest position and re-
place the existing foot with the hemming foot.
Fold the start of the hem around 2 mm in with a double fold.
Insert this folded hem into the coil of the roll hemming foot.
Carefully and slowly sew a few stitches, preferably by turning
the hand wheel (10).
If the start of the hem was pulled into the foot, carefully start se-
wing the hem.
Always hold the edge of the fabric somewhat over the left-hand
side of the sewing foot, to stop the fabric slipping out of the coil.
Make sure that the fabric does not slip under the right-hand side
of the sewing foot.
112


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD11836 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD11836 in the language / languages: English, German, Portuguese, Spanish as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medion MD11836

Medion MD11836 User Manual - German - 42 pages

Medion MD11836 User Manual - Dutch - 44 pages

Medion MD11836 User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info