753409
94
Zoom out
Zoom in
Previous page
1/138
Next page
3.7.8. Satellite
Make sure that your satellite connection is connected to the LNB connection.
Select the required type of satellite (PREFERRED SATELLITE or GENERAL SATELLITE) and press
OK.
Select the desired provider and press OK. This option is only available under PREFERRED SATEL
LITE.
If you initially selected PREFERRED SATELLITE and the provider FAST SCAN
DEUTSCHLAND, an LNB search is performed before the channel search. To start the LNB
search, select SCAN and press OK or . The LNB search is started.
Then select the antenna type UNIVERSAL, SINGLECABLE or JESS SINGLECABLE and press OK.
Press the button to continue. Under SINGLECABLE and JESS SINGLECABLE the following op-
tions are available:
DVBS configuration setting
TUNER Select the desired USER BAND 18.
BAND FREQUENCY Select the band frequency 1210, 1284, 1400 or USER DEFINED.
USER DEFINED You can set a band frequency of your choice here using the virtual
keyboard. This option can only be edited if you have previously se-
lected USER DEFINED under BAND FREQUENCY.
If necessary, you can now configure satellite settings. Otherwise, skip DVBS configuration set-
ting by pressing the button.
Under SELECT SATELLITE, you can, if necessary, configure settings for the following options:
Satellite Setup
UNIVERSAL
SATELLITE STATUS Activate/deactivate the satellite status. When deactivated, LNB set-
tings can be changed or a search started.
LNB POWER Set the LNB power here.
LNB FREQUENCY You can set the centre frequency here.
DISEQC SET If you have connected multiple LNBs or a DiSEqC switch to your sat-
ellite antenna, set the desired LNB here.
TONE 22 KHZ Set the audio here, if necessary.
TONE BURST If your satellite system requires a tone burst, you can set it to BURST
A or B here
TRANSPONDER Select the transponder on which the search will be started.
SIGNAL QUALITY The signal quality is shown in per cent. Settings here cannot be
changed.
SIGNAL LEVEL The signal strength is shown in per cent. Settings here cannot be
changed.
Satellite Setup
SINGLECABLE / JESS SINGLECABLE
SATELLITE STATUS Activate/deactivate the satellite status. When deactivated, LNB set-
tings can be changed or a search started.
POSITION Select the desired position A or B here
LNB FREQUENCY You can set the centre frequency here.
TRANSPONDER Select the transponder on which the search will be started.
13
EN
MD32300-2 DE eCom QSG 30031292_299_334 RC.indb 13MD32300-2 DE eCom QSG 30031292_299_334 RC.indb 13 15.02.2021 13:17:1615.02.2021 13:17:16
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Medion MD 32300 - Life X14330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Medion MD 32300 - Life X14330 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 8,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Medion MD 32300 - Life X14330

Medion MD 32300 - Life X14330 User Manual - German - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info