Manual Meade ETX-105AT (page 13 of 60) (English)

470208

Zoom out

Zoom in

1/60

4. Place the 26mm eyepiece (12, Fig. 15) into the eyepiece holder on the

telescope and tighten the attachment thumbscrew (

13, Fig. 15) to a "firm feel" only.

Make sure that the flip-mirror control (

14, Fig. 15) is in the “up” position, as shown

in the above photo. See page 8, for more information. Remove the dust cover (

15,

Fig. 15

) from the end of the telescope tube.

5. Make sure that the computer control panel power switch (A, Fig. 2) is in the OFF

position. Remove the Autostar handbox and the coiled cord from the packing

materials. Plug one end of the cord into the HBX port (

C, Fig. 2)and the other end

of the coiled cord into the coiled cord port at the bottom of Autostar handbox, as

shown above.

6. Tighten (to a "firm feel" only, do not overtighten) the vertical lock (Fig. 6) and the hor-

izontal lock (

Fig. 9)

Attaching the Viewfinder

ETX-90AT: 8 x 21mm Viewfinder: Slide the eyepiece end of the viewfinder

through the front of the viewfinder bracket (16, Fig. 18).

ETX-105AT or ETX-125AT: 8 x 25mm Right-Angle Viewfinder: Slide the front

cell end of the right-angle viewfinder through the rear of the viewfinder bracket

(17, Fig. 19).

Unthread the six alignment screws slightly to fit the viewfinder through the

bracket. With the viewfinder in place, tighten the six alignment screws to a firm feel

only against the viewfinder tube.

Using The Viewfinder

As with most astronomical telescopes, the ETX model telescopes present a fairly

narrow field of view to the observer. As a result it is sometimes difficult to locate and

center objects in the telescope’s field of view. The viewfinder, by contrast, is a low-

power, wide-field sighting scope with crosshairs that let you easily center objects in

the eyepiece of the main telescope’s field of view. The telescope viewfinder is a great

help in locating faint astronomical objects before you begin observing through the

telescope eyepiece.

ETX-90AT 8 x 21mm Erect-Image Viewfinder:

Standard equipment with the ETX-90AT, the 8 x 21mm Erect-Image Viewfinder has

8-power magnification and an aperture of 21mm. This viewfinder presents a

correctly oriented image both up-and-down and left-to-right.

ETX-105AT or ETX-125AT 8 x 25mm Right-Angle Viewfinder:

Standard equipment with the ETX-105AT and ETX-125AT, the 8 x 25mm Right-Angle

Viewfinder has 8-power magnification and an aperture of 25mm. This viewfinder

presents a correctly oriented image up-and-down, but is reversed left-for-right.

Fig. 12: Attach telescope to

tripod.

Fig. 11: High latitude leg

mounting hole and

corresponding attachment

knob.

Fig. 10: Loosen control latch .

Fig. 15: Insert eyepiece.

Fig. 16: Tighten vertical

lock.

Fig. 17: Tighten horizontal

lock.

Fig. 13: Level tilt-plate.

Fig. 14: Handbox HBX port.

Fig. 18: ETX-90 Viewfinder Installation.

Fig. 19: ETX-105/-125 Viewfinder

ᕥ

ᕦ

ᕧ

ᕨ

ᕩ

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Meade ETX-105AT in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Meade ETX-105AT Manual

Product: