643529
36
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 6
INSTALLATION AND USE MANUAL
page 36
Operation Technical service – MCZ Group S.p.A. all rights reserved - Reproduction prohibited
6.4. FIRST LIGHTING
It is advisable to approach the first lighting with caution, using
good-quality, well-seasoned wood.
The primary air inlet must be fully open. Do not use alcohol,
petrol, or other volatile flammable substances. On first lighting,
fumes and unpleasant smells may be given off, caused by the drying of
the product; this is not hazardous to the health, and it is sufficient to
ventilate the room adequately. Once combustion has started, pieces of
wood of normal size may be added.
The flame must have as far as possible a smooth and laminar flow. On
the various occasions when the stove needs reloading, the
door should be opened slowly, to avoid blowbacks of smoke
into the room.
Proceed as follows:
Place a small amount of balled paper in the stove.
Cover the paper with a small quantity of twigs and a few pieces of
wood.
Open the primary air register completely (turn completely to the
left) fig.14
Light the paper and if necessary leave the door open to the first
stage.
When the twigs are burning, the door can be closed.
Only once the flame is burning well (presence of a bed of coals and
full combustion), place the air adjustment between the two flames
(see fig.14) large flame to obtain nominal power, small flame for
slow combustion.
As the fire burns, add wood. Never overload the fireplace stove
with wood (see technical specifications in the table).
As soon as the flames have died down and a bed of embers has
formed, load the stove normally. Small loads of wood are preferable to
large ones for combustion.
Attention
Do not use volatile, flammable substances
(petrol, alcohol etc.) for lighting the fire.
Do not use fuels which could release toxic
substances or pollutants.
Do not put the fire out by throwing water on it.
Check the external and internal air intakes, and
the flue pipe, at least once a year, arranging for
them to be cleaned.
During use, the metal parts and the glass reach
high temperatures. For all jobs of loading the
stove, adjustment or cleaning the ash drawer,
use the insulating glove provided.
Never leave children unattended near the
fireplace stove when it is in use.
The risk of burns from contact with hot surfaces
is very high.
Figure 15 - Door open to first stage
Figure 14 - Adjustment of air register
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 90 Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 90 Wood in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info