643529

MCZ Vivo 90 Wood Manual

35
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 6
INSTALLATION AND USE MANUAL
page 35
Operation Technical service – MCZ Group S.p.A. all rights reserved - Reproduction prohibited
6.2.1. Phases for first test lighting
Make sure you have read and completely understood the
contents of this instruction booklet.
Remove any components which might burn from the fireplace
stove and door (Packaging, various instructions and adhesive
labels).
Remove the stickers from the ceramic glass or the high
temperature could melt them and irreparably damage the glass.
In this case, the MCZ warranty does not cover the glass.
Completely open the front register of the combustion air. (turn
the lever all the way to the left)
Place wood in small pieces that is well dried (humidity 15/20%).
Light the fire at low power without excessively heating the
structure. It is normal that odours from manufacturing residue
will form the first time lighting occurs, and will disappear after a
lighting at full power has occurred a few times.
6.3. CHOICE OF FUEL
To obtain the maximum performance from your VIVO fireplace stove, it
is of primary importance to use wood with suitable characteristics.
It is advisable to use wood for heating such as oak, beech, locust
tree, or oak with good calorific energy, or logs of pressed wood that
do not have resin. These have a high calorific power and must
be used with caution to avoid overheating which could damage
the stove.
It is advisable to use fuels such as poplar, pine, lime tree, or
chestnut which have low calorific power, since they are soft wood and
also they do not burn for a long time.
Avoid using fuels such as pine, fir, and olive as they contain a high
degree of resin and their combustion may substantially soil the fire
mouth and the ceramic glass; also, they do not have an exceptional
yield.
For all types of wood listed, the humidity they contain is
essential because it determines the calorific energy.
Do not use treated fuels (such as painted or
varnished wood, or particle board) or unsuitable
materials (such as plastics and derivatives), which
could release toxic or polluting substances. Do not
burn rubbish.
The gases produced by combustion due the use of
unsuitable fuels cause damage to the fireplace stove
and the chimney, they cause pollution and can
compromise your health.
A high percentage of humidity produces condensation in the
smoke duct causing an alteration in the draught and
generating smoke and a significant deposit of soot on the
glass of the door and in the flue pipe with a possible risk of
a chimney fire later on.
Wood drying
time (i.e. beech)
%
humidity
Heat
power
Kcal/h
Freshly cut 50 /
3 months 40 2410
6 months 35 2700
9 months 30 2900
12 months 25 3150
15 months 20 3400
18 months 15 3710
21 months 10 3980
Figure 13 – Calorific energy (e.g. beech) in
relation to humidity contained.
Figure 12 – Maximum adjustment of
combustion air opening
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 90 Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 90 Wood in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info