643529
16
Zoom out
Zoom in
Previous page
1/42
Next page
Chapter 4
INSTALLATION AND USE MANUAL
page 16
Installation and assembly Technical service MCZ Group S.p.A. all rights reserved - Reproduction prohibited
4.2.1. Natural convection (COMFORT AIR VN)
If this system is used, the installer must make a connection to the
outside (B) concerning the inlet of combustion air (fig.2), and an air
intake (A) for the inlet of fresh ventilation air inside the cladding.
For the ducting of hot air C, it is necessary the install the hoses Ø 150
mm C (optional) on the flanges located on the upper part of the stove
unit
ATTENTION!
FOR BEST OPERATION, MCZ STRONGLY SUGGESTS
CONNECTION THE COMBUSTION AIR INTAKE Ø100
DIRECTLY TO AN EXTERNAL AIR INTAKE.
4.2.2. Forced convection (COMFORT AIR VF)
Also in this case, it is necessary to connect the stove unit to an external
air intake (B) with a pipe Ø 100 (optional) using the flange located on
the back of the stove unit. (figure 1) If it is not possible to connect
directly to the air intake, at least connect the flange to the outside of
the cladding.
This operation is necessary to ensure proper operation of the
COMFORT AIR KIT. If the combustion air intake is not connected
directly to the an external air intake (B), it will be obligatory to provide
an air intake (A) that has a free passage of not less than 150 cm
2
so
that natural fresh air flows into the room of installation (preferably
inside the cladding).Figure 3
For the ducting of hot air, it is necessary to install a reduction flange Ø
100 on the upper connections of the stove unit. Then insert in the
flanges of the hoses Ø 100 the COMFORT AIR outlets (C).
Then proceed as set forth in
paragraph 5.3 “Installation of comfort air
kit".
ATTENTION!
FOR BEST OPERATION, MCZ STRONGLY SUGGESTS
CONNECTING THE COMBUSTION AIR INTAKE Ø100
DIRECTLY TO AN EXTERNAL AIR INTAKE OR AT
LEAST TO HAVE AIR DRAWN FROM OUTSIDE THE
CLADDING.
Figure 2 – Natural convection
A
B
C
C
B
A
C
C
Figure 3 – Forced convection
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ Vivo 90 Wood at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ Vivo 90 Wood in the language / languages: English as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info