812486
50
Zoom out
Zoom in
Previous page
1/72
Next page
50
32-ALARMS
ALARM SIGNALLING
If an operating anomaly occurs the stove starts switching o due to the alarm.
The following table describes the possible alarms indicated by the stove, associated to the respective code that appears on the emergency
panel and helpful tips to solve the problem.
MESSAGE ON DISPLAY TYPE OF PROBLEM SOLUTION
A01
FAILED IGNITION
The ame does not ignite Check the level of pellets in the hopper.
Check that the brazier is correctly positioned in its seat
and has no deposits or unburnt material.
Make sure the glow plug warms up.
Carefully empty and clean the brazier before restarting.
A02
NO FLAME
The re goes out abnormally Check the level of pellets in the hopper.
Check that the brazier rests correctly in its seat and has no
visible deposits of unburnt pellets.
A03
PELLET SAFETY
The temperature of the pellet hopper
exceeds the required safety threshold.
The structure overheats due to reduced
heat dissipation.
The structure is too hot because the product has been
used for too long at the maximum power or there is poor
ventilation. When the stove is cold enough, press the
button for at least 3" to reset the alarm. Once the alarm is
cleared, the product can be switched on normally.
A04
SMOKE OVERTEMPER
ATURE
The temperature of the exhaust smoke has
exceeded certain preset safety limits.
The stove switches o automatically. Let the stove cool
down for a few minutes and then switch it on again.
Check the smoke expulsion and verify the type of pellets
used according to the instructions found in Chap. 2 of this
manual.
A05
OBSTRUCTION
Flue clogged - wind. Check the smoke duct and make sure the door is closed.
The smoke extractor fails to guarantee
sucient primary air, required for correct
combustion.
Draught diculties or clogged brazier.
Check whether the brazier is clogged and clean it, if
necessary.
Check, and if necessary clean, the smoke duct and the air
inlet.
A08
FUMES MOTOR FAULT
Abnormal operation of smoke fan Check cleanliness of the smoke fan compartment and
check whether dirt is blocking it. If this is not enough, the
smoke fan is faulty. Contact an authorised service centre
to have it replaced.
A09
THERMOCOUPLE FAULT
The smoke probe is faulty and does not
detect the exhaust smoke temperature
properly.
Contact an authorised service centre to have the
component replaced.
A11
FEED SCREW FAULT
Pellet supply fault Contact an authorised service centre to have the
component replaced.
50


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ SUITE COMFORT AIR 12 UP M3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ SUITE COMFORT AIR 12 UP M3 in the language / languages: English as an attachment in your email.

The manual is 11.92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ SUITE COMFORT AIR 12 UP M3

MCZ SUITE COMFORT AIR 12 UP M3 Installation Guide - English - 64 pages

MCZ SUITE COMFORT AIR 12 UP M3 User Manual - German - 72 pages

MCZ SUITE COMFORT AIR 12 UP M3 Installation Guide - German - 64 pages

MCZ SUITE COMFORT AIR 12 UP M3 User Manual - Dutch - 72 pages

MCZ SUITE COMFORT AIR 12 UP M3 Installation Guide - Dutch - 64 pages

MCZ SUITE COMFORT AIR 12 UP M3 User Manual - French - 72 pages

MCZ SUITE COMFORT AIR 12 UP M3 Installation Guide - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info