643531
52
Zoom out
Zoom in
Previous page
1/68
Next page
50
11-ALARMS
ALARM ALERTS
When a condition occurs other than the one expected for regular operation of the stove, an alarm is triggered. The control panel gives
information about the cause of the alarm; pressing the info button gives you summary information about how to restore the stoves
operation. The alarm buzzer does not sound for alarms A01 and A02 so as not to disturb the user if there are no pellets in the tank during
the night.
The following table describes the possible alarms indicated by the stove, associated to the respective code that appears on the emergency
panel and helpful tips to solve the problem.
MESSAGE ON DISPLAY TYPE OF PROBLEM SOLUTION
A01
The ame does not light Check the level of pellets in the tank.
Check that the brazier is correctly positioned in its seat
and has no build-up or unburned material.
Make sure the ignition plug warms up.
Thoroughly empty and clean the brazier before restarting.
A02
The re goes out abnormally. Check the level of pellets in the tank.
Check that the brazier rests correctly in its seat and has
no visible deposits of unburned pellets.
A03
The temperature of the pellet hopper
exceeds the required safety threshold.
Wait until the end of the cooling phase, stop the alarm and
re-ignite the stove setting the supply of fuel to minimum
(SETTINGS menu - pellet recipe). If the alarm persists,
contact the service centre.
Check whether the room fan is working correctly.
A04
Smoke overtemperature Reduce the load of pellets (SETTINGS menu - Pellet recipe);
check cleaning of the brazier.
A05
Safety devices alarm
Smoke pressure switch intervention Check for chimney obstructions / door open
Fuel loading hatch Close the hatch.
Lower the fuel level in the tank.
Open stove door Close the door
A08
Anomalous operation of smoke fan. Delete the alarm and switch the stove on again. If the
alarm persists, contact the service centre.
A09
Fault with the smoke sensor. Delete the alarm and switch the stove on again. If the
alarm persists, contact the service centre.
Service
Routine maintenance warning (does not
seize)
When this blinking message appears upon start-up, it
means it is time to carry out scheduled maintenance. Call
the assistance centre.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ AMY Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ AMY Air in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ AMY Air

MCZ AMY Air Usermanual and installation guide - Dutch - 64 pages

MCZ AMY Air Usermanual and installation guide - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info