643531
53
Zoom out
Zoom in
Previous page
1/68
Next page
51
11-ALARMS
Technical Dept. - All rights reserved - Reproduction is prohibited
Exiting the alarm conditions
To reset the alarm, hold the ON/OFF button down for a while: the stove will check to see whether the cause of the alarm is still present or
not. In the rst case, the alarm displays again, in the second case it turns OFF.
The product can be switched on again only after the cause of the fault has been denitively eliminated.
Normal shut down (panel display: shutdown)
When the shutdown key is pressed, or when there is an alarm signal, the stove enters the thermal extinguishing phase which involves
automatic execution of the following phases.
pellet loading stops
the room fan keeps running at the set speed so that the fumes temperature reaches 100°C, then runs at minimum speed until the
shut down temperature is reached.
The smoke extractor fan is is activated at maximum speed and remains on for a xed period of 10 minutes, at the end of which if
the smoke T has dropped below 45°C (displayed in the INFO menu), the fan stops, otherwise it will continue to operate at minimum
speed until the temperature drops below the threshold, and then stops.
POWER FAILURE WITH STOVE ON (panel display: ACCENSIONE DOPO BLACKOUT (STARTUP AFTER POWER FAILURE)
for 10’, then ACCENSIONE (STARTUP))
In the event of a power failure, the stove does the following:
Power failure of less than 10”: continues the work in progress;
After a loss of power of more than 10’’ which occurred when the stove was on, or during ignition, you can restore the stove to its
previous operating condition when power returns as follows:
1 - Cool the system by activating the smoke extractor at minimum speed for 10’ then proceed to the next step;
2 - Restore the stove to the operating condition prior to the power failure.
During phase 1, the panel shows ACCENSIONE DOPO BLACKOUT (STARTUP AFTER POWER FAILURE).
During phase 2, the panel shows ACCENSIONE (STARTUP).
If during phase 1-2 the stove receives manual user commands from the control panel or remote control, it stops the blackout restoration
sequence and begins the start-up or shutdown commanded by the user.
If the stove experiences a loss of power greater than 10’ while it is shutting down, when power is restored to the stove, it will automatically
turn on in shutdown mode, even if the smoke temperature has fallen below 45°C in the meantime. This phase can be skipped by pressing
key 0/1 (skips to start-up) and pressing it again (recognises that the stove is o).
SAFETY ALARM A05
The safety alarm includes operation of the smoke pressure switch, of the open fuel loading door and stove door.
The time between the fumes pressure switch tripping and the alarm signal is 30 seconds, after which the stove is stopped (e.g. after 30
seconds with the pellet loading hatch open, alarm A05 is tripped).
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MCZ AMY Air at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MCZ AMY Air in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of MCZ AMY Air

MCZ AMY Air Usermanual and installation guide - Dutch - 64 pages

MCZ AMY Air Usermanual and installation guide - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info