4.3.1 2nd area
To mow secondary areas the operating mode
2nd area
must be chosen. Selecting
2nd area
means that the product mows until the battery is
empty.
If the product is charged in the
2nd area
mode, it
will fully charge, drive out about 50 cm and then
stop. This indicates that the product is charged
and ready to start mowing.
4.3.2 Power Cut
The schedule settings can be temporarily
overridden by selecting
Power Cut
. It is possible
to override the schedule for 3 h. It is not possible
to override a standby period.
4.3.3 Spot Cut
Spot cut
is useful for quickly mowing an area
where the grass has been mown less than in
other parts of the garden. You must manually
move the product to the chosen area.
Spot cut means that the product mows in a spiral
pattern in order to cut the grass in the area where
it was started.
The
Spot cut
function is activated with the STAR
button.
4.4 Park modes
4.4.1 Home & Stay
Park mode
Home & Stay
means that the product
remains in the charging station until a different
operating mode is selected.
4.4.2 Home & Wait
Park mode
Home & Wait
means that the product
remains in the charging station until the next
schedule or standby permits operation. Refer to
Schedule and Standby on page 27
.
4.5 Stop
1. Press the STOP button on top of the
product.
The product stops and the blade motor stops.
4.6 Switch off
1.
Press the STOP button.
2. Open the hatch.
3. Press the ON/OFF button for 3 seconds.
4. The product shuts down.
5.
Check that the indicator lamp on the keypad
is not lit.
4.7 Schedule and Standby
The product has an inbuilt standby period
according to the Standby time table. The standby
period provides for instance a good opportunity to
water or play games on the lawn.
985 - 004 - 22.01.2019 Operation - 27
