684126
9
Zoom out
Zoom in
Previous page
1/320
Next page
OPERATING
English 9
Work area safety
Branches, twigs, stones, etc. should be removed from
the lawn before you start to mow.
Objects hitting against the cutting attachment could
be thrown and cause damage to people and objects.
Keep people and animals well away.
Do not use the machine in bad weather, such as
dense fog, hea
vy rain, strong wind, intense cold, etc.
Working in bad weather is tiring and can lead to
dangerous conditions, e.g. slippery surfaces.
Observe your surroundings to ensure that nothing can
aff
ect y
our control of the machine.
Beware of roots, stones, twigs, pits, ditches etc. Tall
grass can hide obstacles.
Mowing slopes can be dangerous. Do not use the
lawn mo
wer on very steep slopes. The lawn mower
should not be used on inclines greater than 15
degrees.
On sloping ground you should work along the slope. It
is m
uch easier to w
ork along a slope than it is to work
up and down it.
Be careful when you are approaching hidden corners
and objects that could bloc
k your view.
Work safety
A lawn mower is only designed to mow lawns. All
other use is forbidden.
Wear personal protective equipment. See instructions
under the ”Personal protective equipment” heading.
Do not start a lawn mower unless the cutter and all
covers are fitted correctly. Otherwise the cutter could
come loose and cause personal injuries.
Make sure the cutter does not hit foreign objects such
as stones, roots or the lik
e. This can make the cutter
dull and bend the engine shaft. A bent axle gives
imbalance and heavy vibration, which results in a
great risk of the cutter becoming loose.
The brake handle must never be permanently
anchored in handle when the machine is r
unning.
Place the lawn mower on firm, flat surface and start it.
Make sure that the cutter cannot come into contact
with the ground or other objects.
Always place yourself behind the machine. Allow all
the wheels to remain on the ground and k
eep both
hands on the handle when mowing. Keep your hands
and feet away from the rotating blades.
Do not tilt the machine when the engine is running.
Pay particular attention when pulling the machine
tow
ards you during work.
Never lift up the lawn mower or carry it around when
the engine is running. If you must lift the lawn mower,
first switch off the engine and disconnect the ignition
lead from the spark plug.
The engine should be switched off when moving over
g
round that is not to be mo
wed. For example, gravel
paths, stone, shingle, asphalt, etc.
Never run with the machine when it is running. You
should alwa
ys walk with the lawn mower.
Shut down the engine before changing the cutting
height. Never make adjustments with the engine
running.
Never leave the machine unsupervised with the motor
running.
Turn off the motor. Ensure the cutting
attachment has stopped rotating.
If any foreign object is hit or if vibrations occur stop the
machine immediately.
Disconnect the HT lead from
the spark plug. Check that the machine is not
damaged. Repair any damage.
Basic working techniques
Always cut with a sharp blade for optimal results. A
dull blade gives an uneven cut and the grass becomes
yellow on the surface of the cut.
Never mow more than 1/3 of the length of the grass.
This especially applies during dr
y periods. Mow first
with the cutting height set high. Then check the result
and lower to an appropriate height. If the grass is
really long, drive slowly and mow twice if necessary.
Cut in different directions each time in order to avoid
str
ipes in the la
wn.
Transport and storage
Secure the equipment during transportation in order
to avoid transport damage and accidents.
Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
Store the machine and its equipment in a dry and frost
proof place.
For transport and storage of fuel, see the section
"Fuel handling".
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch M51 -140RX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch M51 -140RX in the language / languages: All languages as an attachment in your email.

The manual is 10,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info