590534
10
Zoom out
Zoom in
Previous page
1/13
Next page
F. BLADE AND NYLON STRING HEAD ASSEMBLY
Assemble the correct guard to suit the kind of
blade or nylon string head to be used (See
section: SAFETY GUARD ASSEMBLY).
1) Assemble blade as illustrated:
a) Flange guard - b) Upper cap with blade
centering - c) Blade with text and directional
arrow facing upwards - d) Lower washer - e)
Fixed mower gauge - f) Blade locking screw
(length mm 16).
2) If you want to assemble the rotating mower
gauge,proceed asillustrated:
a) Flange guard - b) Upper cap with blade
centering - c) Blade with text and directional
arrow facing upwards - d) Lower washer - e)
E. SAFETY GUARD ASSEMBLY
1) In the interest of safety, it is imperative that the
unit is used with the correct guard (P/N 247208)
when using any blade or a nylon string head,
except the 24-80 tooth blade. Line cutter blade
(L): assemble as illustrated.
2) When using a saw tooth blade (optional
accessory), the correct guard must be fitted (P/N
240553).
A double shoulder harness must also be worn.
Only use blades or nylon string heads clearly
marked with a maximum speed of at least 10,500
min
-1
.
Follow the fitting instructions carefully.
N.B: Saw tooth blades (24 - 80 tooth) have a
central base diametre of 20mm and therefore
require the use of the appropriate size top flange
to ensure a correct fit. The part number is
detailed in the cutting attachment summary chart.
Use only fuel recommended by this manual.
This product is fitted with a 2-stroke engine and
therefore requires a 2-stroke petrol and oil mix.
Use unleaded petrol with a minimum octane
rating of 90.
Only use oil from sealed containers. In order to
obtain a good fuel mix, put the oil into the
container before the petrol.
The use of sub-standard petrol or oil may reduce
performance or reduce the life of certain
components.
UNLEADED PETROL
If using unleaded petrol, you must use a totally
synthetic 2-stroke engine oil or branded
2-stroke engine oil, see table.
IMPORTANT
Always shake the fuel mix container thoroughly
before pouring any fuel mix.
Fuel mix properties may deteriorate with time and
should be used up within 2 months.
We recommend that you prepare fuel mix according
to your immediate requirements only. Never use fuel
mix more than 2 months old so as to avoid possible
engine damage.
WARNING
Do not smoke when re-fuelling.
Always open the fuel cap slowly, to release any
pressure build up in the tank.
Re-fuel in open spaces only, keeping away from
naked flames or sparks.
SAFE STORAGE OF FUEL
Petrol fuel mix is highly inflammable. Put out all
cigarettes, pipes and cigars before working with
fuel. Avoid spilling fuel.
Store fuel in a cool, well ventilated place, in an
approved container specifically designed for the
purpose. Never store engine with fuel in the tank
in enclosed, poorly ventilated areas, where fuel
fumes may reach an open flame, spark or pilot
light such as in a furnace, water heater, clothes
dryer etc.
Petrol fumes can cause an explosion or a fire.
Never store large amounts of fuel.
To prevent possible restarting problems avoid
running the fuel tank dry. This also helps to
extend engine life.
D. FUEL MIX
GUARD (PROTECTION) MUST ALSO BE USED
AS MARKED IN THE SUMMARY CHART (SEE
CLOTHES SECTION IN SAFETY CHAPTER:
ALWAYS WEAR A HELMET).
ALWAYS USE GENUINE ACCESSORIES AND
SPARE PARTS AVAILABLE FROM
AUTHORISED SERVICING DEALERS.
THE USE OF NON-ORIGINAL ACCESSORIES
AND SPARE PARTS INCREASES THE RISK OF
ACCIDENTS AND IN SUCH A CASE THE
COMPANY IS NOT LIABLE FOR DAMAGE TO
PEOPLE AND/OR THINGS.
8
A
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch EUROMAC D321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch EUROMAC D321 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of McCulloch EUROMAC D321

McCulloch EUROMAC D321 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 96 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info