Manual McCulloch EUROMAC D321 (page 8 of 13) (English)

590534

Zoom out

Zoom in

1/13

1) ENGINE

2) SHAFT

3) THROTTLE TRIGGER

4) THROTTLE ADVANCE

5) RIGHT CONTROL HANDLE

6) BLADE

7) NYLON STRING HEAD

8) STOP SWITCH

9) CHOKE LEVER

10) STARTER HANDLE

11) HARNESS RING

12) SPARK PLUG

13) AIR FILTER COVER

14) FUEL TANK CAP

15) MUFFLER SHIELD

16) ENGINE SHAFT JOINT

17) FRONT HANDLE

18) REAR CONTROL GRIP

19) SAFETY GUARD

20) SAFETY GRIP

21) SAFETY POLE BARRIER

1) Make sure all operators study this manual

carefully before using the trimmer; only use this

machine for usage specifically mentioned in

this manual.

Never allow children to use the trimmer.

2) When working with the trimmer wear suitable

clothes: a) Close fitting protective clothes ( do not

wear short trousers or loose clothes). b) Safety

shoes (do not wear sandals and do not work

barefoot). c) Heavy-duty gloves. d) Safety face

shield or goggles. Ensure you peel off the

protective films, if existing, from the see -

through plastic. e) Ear protection. f) Head

protection when using circular saw blades. Make

sure you know how to stop the engine in an

emergency (see the section STARTING AND

STOPPING ENGINE). Never use the trimmer

when tired, physically indisposed or under the

effect of alcohol, certain medicines or other

drugs. Be careful of the rotating cutting

attachment and hot surfaces on the unit.

3) Prolonged use of this product or other

machines exposing the operator to vibration

may produce Whitefinger’s disease (Raynaud’s

Phenomenon). This may reduce the hands’

ability to feel and regulate temperature and

may produce general numbness. Continual or

regular users should therefore monitor closely

the condition of their hands or fingers. If any of

the symptoms appear, seek immediate medical

advice. Always hold the trimmer firmly with

both hands. When working maintain a firm

foothold. The trimmer must be used exclusively

as recommended (see section SAFETY USAGE).

4) Do not carry the trimmer while the engine is

running even for short distances; switch off the

engine and carry the unit with the cutting head

behind you. When carrying the trimmer in a

vehicle, secure it to avoid fuel leakage. Always

empty the fuel tank before transporting the unit.

ATTENTION: For your safety the blade must be

kept at all times in its proper case during transport

and storage. Start the trimmer on a flat surface.

When starting the unit, ensure you have a firm

footing. Make sure the blade or the nylon string

head does not touch the ground or any obstacle.

5) PRECAUTIONS AGAINST FIRE: do not operate

the trimmer near fire or spilled petrol. Do not run

the engine in closed or poorly ventilated areas.

EXHAUST GASES ARE POISONOUS WHEN

INHALED, THEY CAN CAUSE SUFFOCATION

AND DEATH.

After refuelling always wipe off any spilled fuel.

Do not smoke during this operation. Start the

engine far away from the refuelling area and from

fuel containers (minimum distance 3 meters).

Do not refuel while the engine is still running.

6) Keep people and animals away from working

area (minimum distance 15 meters). If somebody

should approach you, turn the engine off and

stop the blade or the rotating head (see chapter

STARTING AND STOPPING THE ENGINE) as

during operation the blade or the nylon string

head might project grass, grit, or other debris.

The blade is sharp, be careful even if handling it

when the engine is off.

Wear heavy-duty gloves. Turn the engine off

and wait for rotating parts to stop completely

before working on the machine or before

touching the blade or the string head above all

to remove possible entangled material.

DO NOT USE THE TRIMMER AT ALL IF THE

SPECIFIED SAFETY GUARD IS NOT FIRMLY

ATTACHED (see sections SAFETY USAGE and

BLADES AND NYLON STRING HEAD

ASSEMBLY).

Pay careful attention to safety

recommendations as you might put your life or

somebody else’s in danger as a result of: a)

possible contact with cutting or rotating parts.

b) possibility of projection of various objects.

WARNING: do not start engine if it is not

attached to the shaft as the clutch might

disintegrate. For units equipped with a clutch,

be sure the cutting attachment stops turning

when the engine idles.

A. GENERAL DESCRIPTION

B. SAFETY RULES

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch EUROMAC D321 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of McCulloch EUROMAC D321

McCulloch EUROMAC D321 User Manual - English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish - 96 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

McCulloch EUROMAC D321 Manual

Product: