684266

McCulloch B428 PS Manual

12
Zoom out
Zoom in
Previous page
1/508
Next page
small posts, trees or fence wire.
 For mowing or sweeping, use full throttle for a good
clean job.
TRIMMING
Hold the bottom of the trimmer head about 8 cm above
the ground and at an angle. Allow only the tip of the
line to make contact. Do not force trimmer line into
work area.
SCALPING
The scalping technique removes unwanted vegetation
down to the ground. Hold the bottom of the trimmer
head about 8 cm above the ground and at an angle.
Allow the tip of the trimmer line to strike the ground
around objects such as trees, posts, and monuments.
This technique increases line wear.
MOWING
Your trimmer is ideal for mowing in places
conventional lawn mowers cannot reach. In the
mowing position, keep the trimmer line parallel to
the ground. Avoid pressing the trimmer head into the
ground as this can scalp the ground and damage the
machine.
SWEEPING
The fanning action of the rotating trimmer line can be
used for a quick and easy clean up. Keep the trimmer
line parallel to and above the surfaces being swept
and move the machine from side to side.
TRIMMER LINE ADVANCE
The trimmer line will advance approximately 5 cm
each time the bottom of the trimmer head is tapped on
the ground with the engine running at full throttle.
7KHPRVWHI¿FLHQWWULPPHUOLQHOHQJWKLVWKHPD[LPXP
length allowed by the line limiter.
Always keep the shield in place when the machine is
being operated.
To advance the trimmer line:
 Operate the engine at full throttle.
 Hold the trimmer head parallel to and above the
grassy area.
 Tap the bottom of the trimmer head lightly on the
ground one time. Approximately 5 cm of trimmer line
will be advanced with each tap.
Always tap the trimmer head on a grassy area.
Tapping on surfaces such as concrete or asphalt can
cause excessive wear to the trimmer head.
If the trimmer line is worn down to 5 cm or less,
more than one tap will be required to obtain the most
HI¿FLHQWOLQHOHQJWK

… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for McCulloch B428 PS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of McCulloch B428 PS in the language / languages: All languages as an attachment in your email.

The manual is 15,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info