634684

Mc crypt DJ-40 Manual

22
Zoom out
Zoom in
Previous page
1/28
Next page
24
9. Connection
Connection MIC (7)
You can connect a microphone to this 6.3mm jack input.
9.2. Connecting the outputs
Output OUTPUT (16)
Connect a free cinch input of your ampli er (e.g. AUX) to the OUTPUT. The output is in stereo format.
The white cinch output jack of the mixer is connected to the left ampli er input.
The red cinch output jack of the mixer is connected to the right ampli er input.
Headphone jack HEADPHONE (8)
Connect a stereo headphone with a 6.3 mm jack plug to the headphone jack. The headphones must have an impedance of at least 32 ohms,
as otherwise maladjustment may occur and the device could be damaged.
9.3. Connecting the Power Supply
The mixer and all connected devices must be switched off.
Connect the low-voltage plug of the supplied plug-in power unit (22) with the low-voltage jack AC 9V 1000 mA (15) of the mixer.
Plug the plug-in power unit into a 230V~/50 Hz mains socket.
37
9. Raccordement
Pince vissée de mise à la masse (19)
Si votre lecteur de disques dispose d’un conducteur de mise à la masse propre (généralement un câble n noir avec cosse), reliez-le à la pince
de mise à la masse a n d’éviter des bruits de ron ement.
Raccordement «MIC» (7)
Cette entrée jack de 6,3mm vous permet de raccorder un microphone.
9.2. Raccordement des sorties
Sortie «OUTPUT» (16)
Raccordez à la sortie «OUTPUT» une entrée Cinch libre de votre ampli cateur (par exemple AUX). La sortie est dans la version stéréo.
La douille de sortie Cinch blanche de la table de mixage est reliée à l’entrée gauche de l’ampli cateur.
La douille de sortie Cinch rouge de la table de mixage est reliée à l’entrée droite de l’ampli cateur.
Douille casque «HEADPHONES» (8)
Raccordez à la douille casque un casque stéréo avec une prise jack de 6,3 mm. Le casque doit disposer d’une impédance d’au moins 32 Ohm
sinon il peut provoquer de mauvais réglages et endommager l’appareil.
9.3. Raccordement de l’alimentation en tension
La table de mixage et tous les appareils raccordés doivent être mis hors tension.
Raccordez la che de basse tension du composant che réseau (22) à la douille basse tension «AC 9V 1000 mA» (15) de la table de mixage.
Insérez le composant réseau che dans une prise 230V~/50 Hz.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt DJ-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt DJ-40 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info