634684
18
Zoom out
Zoom in
Previous page
1/28
Next page
20
6. Safety instructions
We do not assume liability for resulting damages to property or personal injury if the product has been abused in any
way or damaged by improper use or failure to observe these operating instructions. The warranty will then expire! An
exclamation mark in a triangle indicates important information in the operating instructions. Carefully read the whole
operating instructions before operating the device, otherwise there is risk of danger.
Product safety
Please observe the safety instructions and operating guidelines of the other equipment this product will be connected to.
The product must not be exposed to substantial mechanical strain.
Do not expose the product to extreme temperatures, direct sunlight, strong vibrations, excessive humidity, dampness, dust, easily
in ammable gases, vapours or solvents.
The ventilation slots must not be blocked. Suf cient air circulation must be ensured, since the device is cooled primarily by means of
circulating air.
Never place the device on a soft surface such as, for example, a carpet or a bed etc. This can prevent dissipation of heat from the device
and can lead to overheating.
Do not place vessels containing liquid such as ower pots, vases etc. on the device. Never pour any liquids onto the device. If any liquid or
an object does come into the appliance, remove the mains plug from the socket immediately and contact a specialist.
The device should not be connected immediately if it was brought into a warm room from an area with cold ambient temperature.
Condensation can destroy the device. Before using the product, wait until it has adjusted to the changed ambient temperature.
The device is constructed to the protection class I standard and may only be connected to a shock-proof socket.
Never disconnect the mains plug from the mains socket by the cable. Always remove the mains plug from the socket by the intended
nger hole.
When setting up the device, make sure that the connection cable is not being pinched or damaged by any sharp edges.
Do not place open sources of re such as burning candles on the device.
Use the device in a temperate climate only, not in a tropical climate.
The power cable must not be pinched or damaged by sharp edges.
The mains plug must be removed from the mains socket:
before cleaning the product, -
during thunder storms and -
if the product will not be used for a longer period of time -
Personal safety
The device may only be operated by persons who are familiar with the appropriate safety instructions and with these operating
instructions.
A defective mains cable may only be replaced by a specialist. There is a danger of an electric shock.
Only a 230 V/50 Hz (10/16 A) earthed power socket may be used as source of electric power. Never try to operate the device at another
voltage.
Make sure that all electric connections and connecting cables between the device and any extension cables are correct.
The mains plug must never be unplugged with wet hands. There is danger of a life-threatening electric shock.
Always place the appliance on a stable base. The mixer falling down might injure people or the device could be damaged. Always make
sure the device is on a stable stand or is safely secured.
Make sure that the earth wire (yellow/green) is not interrupted, either in the power line, in any extension cable that may be connected or in/
at the device, since an interrupted earth wire is extremely dangerous. Operation without an earth connection is not permitted.
Live parts can be exposed when opening covers or removing parts, except when this can be done by hand. Connection points can also
be live. If the appliance needs to be opened for calibrating, maintenance, repair or to replace parts or assemblies, it must be disconnected
from all sources of current rst. If maintenance or repair on the opened, energised device is unavoidable, it may only be carried out by a
specialist who is familiar with the dangers associated with it and the relevant regulations.
This product is not a toy. Keep away from children and animals!
Do not leave packaging material unattended. This could become a dangerous toy for children.
Packaging material can become a dangerous toy for children. Never leave it lying around unattended.
Music played with a high sound pressure level (SPL) can lead to permanent hearing loss, which is treated as bodily harm and is a
punishable offence. Avoid exposing yourself to sound pressure levels of above 90 dBA over longer periods of time.
Miscellaneous
On commercial premises, the accident prevention regulations of the Association of Industrial Professional Associations with respect to electrical
systems and operating equipment must be observed.
Servicing, adjustment or repair works must only be carried out by a specialist/ specialist workshop.
If any questions arise that are not answered in this operating instruction, contact our Technical Advisory Service or other experts.
41
11. Dépannage
La table de mixage Mc Crypt DJ-40 DJ-Mixer est un produit très able et de pointe. Cependant elle peut faire l’objet de problèmes ou défaillances
éventuelles. C’est pourquoi vous trouverez ci-dessous des conseils de réparation.
Respectez absolument les instructions de sécurité !
Problème Cause possible Résolution du problème
Pas de fonctionnement après
l'activation de l'interrupteur Marche/
Arrêt "POWER" (14). La diode de
fonctionnement ne s'allume pas.
Le composant réseau che n'est pas
correctement inséré dans la prise ou il n'est pas
correctement branché sur la table de mixage.
La prise réseau n'est pas sous tension.
Corrigez la position du composant réseau
che.
Faites véri er la prise réseau par un
électricien.
La diode de fonctionnement s'allume
mais on n'entend pas de son.
Pas de signal d'entrée, niveau d'entrée mal
réglé.
Le bouton de réglage MASTER se trouve en
position "0".
Véri ez la source du signal.
Réglez le niveau avec le bouton de
réglage "GAIN" (3) comme décrit dans ces
instructions.
Réglez le bouton MASTER (12)
correctement.
Pas de signal entendu bien que
l'af chage de niveau af che un
signal.
L'appareil branché en aval (ampli cateur) n'est
pas branché ou est mal réglé.
La sortie n'est pas ou est mal raccordée.
Le niveau d'entrée/sortie est mal réglé.
Véri ez l'appareil monté en aval, choisissez
la bonne entrée sur l'ampli cateur.
Raccordez la sortie comme décrit dans ces
instructions.
Réglez le niveau sonore d'entrée/sortie
comme décrit dans ces instructions.
Ron ement. Pas de connexion à la masse entre les
appareils
Un câble est défectueux.
Réalisez une connexion à la masse entre les
appareils par la vis de serrage GND (19).
Changez le câble.
Un canal ne fonctionne pas. Le câble de connexion s'est détaché
Le régleur de balance sur l'ampli cateur est
déréglé.
Véri ez les connexions entre les appareils.
Fixez le régleur de balance de l'ampli cateur.
Son distordu. La sortie de la table de mixage est mal réglée,
l'ampli cateur raccordé est surchargé.
L'appareil raccordé ne correspond pas aux
spéci cations exigées pour un raccordement
Cinch ou ne dipose pas de connexion
correspondante.
Le bouton de réglage "GAIN" est mal réglé, la
table de mixage est surchargée.
Réglez la sortie de la table de mixage comme
décrit dans ces instructions.
Utilisez un appareil avec le niveau sonore et
le raccordement appropriés.
Réglez l'entrée de la table de mixage comme
décrit dans ces instructions.
Toute autre réparation que celles mentionnées précédemment ne doit être effectuée que par du personnel spécialisé et
autorisé.
12. Maintenance
Contrôler régulièrement la sécurité technique de l‘appareil, en s‘assurant notamment de l‘absence d‘endommagements au niveau du boîtier, du
cordon d´alimentation etc. Lorsqu’un fonctionnement sans risque de l’appareil n’est plus assuré, il convient de mettre celui-ci hors service et de
le protéger contre toute mise sous tension involontaire. Un fonctionnement sans risque n’est plus assuré lorsque :
l’appareil est visiblement endommagé,
l’appareil ne fonctionne plus,
suite à un stockage prolongé dans des conditions défavorables ou
suite à de sévères contraintes durant le transport.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt DJ-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt DJ-40 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info