634684
17
Zoom out
Zoom in
Previous page
1/28
Next page
42
12. Maintenance
Avant de procéder au nettoyage ou à la maintenance de l’appareil, il est impératif de respecter les consignes de sécurité suivantes :
Retirez la che de la prise de courant.
Toute réparation ou ouverture de l’appareil doivent uniquement être effectuées par un spécialiste connaissant parfaitement les risques
potentiels encourus et les prescriptions spéci ques en vigueur. Débrancher tous les appareils connectés du réseau électrique avant
de procéder aux opérations d´entretien ou de mise en état. L’appareil ne nécessite aucun entretien et ne doit donc jamais être ouvert.
L’ouverture de l’appareil a pour effet d’annuler la garantie. L’extérieur de l’appareil doit uniquement être nettoyé avec un chiffon doux et sec ou
un pinceau. N’utilisez en aucun cas des nettoyants agressifs ou des solutions chimiques car ces produits attaquent le boîtier ou peuvent nuire
au bon fonctionnement de l’appareil.
13. Elimination
A n de respecter l’environnement et de recycler au maximum les objets usagés, il est demandé à l’utilisateur de rapporter les
appareils à mettre au rebut aux points de collecte et de recyclage
appropriés.
Le logo représentant une poubelle à roulettes barrée d’une croix signi e que ce produit doit être apporté à un point de collecte et
de recyclage des produits électroniques pour que ses matières premières soient recyclées au mieux.
14. Caractéristiques techniques
Tension d'utilisation de composant réseau che 230V~/50 Hz
Tension de fonctionnement de la table de mixage 9V ~
Intensité du courant 1000 mA
Sensibilité de l'entrée Entrées Line -14 dBV (200mV)
Entrées Phono -50 dBV (3,16mV)
Entrée microphone -60 dBV (1mV)
Impédance d'entrée Entrée Line 10 kOhm
Entrées phono 47 kOhm
Entrée microphone 2,2 kOhm
Sortie casque - 2 dBV (794mV) / 32Ohm
Tension de sortie max. +18 dBV (8 V) / 100kOhm (MASTER)
Tension d'entrée (1kHz / max. Gain) max. Entrées Line + 4 dBV
Entrées Phono - 32 dBV
Entrée microphone - 42 dBV
Impédance de sortie 1 kOhm (OUTPUT)
Plage fréquences 20 – 20 000 Hz
Ration S/N 111 dB
Facteur de distorsion 0,003 %
Séparation canaux 70 dB
Dimensions (l x H x Profondeur) 228 x 81,6 x 236 mm
Poids env. 1,2 kg
19
1. Intended use
The Mc Crypt Multi-Mixer SA 100/2 is intended for use with stereos at home and in the semi-professional environment. It serves for mixing and
regulating low-level audio signals. To do so, the device is interposed between the signal sources you want to regulate and an audio ampli er.
The product may only be connected to a 230 Volt / 50 Hz (10/16 A) AC earthed socket. Use is only permitted in closed, dry rooms, meaning
not out in the open. The contact with moisture has to be avoided at all costs. For reasons of safety and licensing (CE) it is not allowed to alter
respectively modify the product. Another use than the one described above leads to damages to the product and is also associated with dangers
like short circuit, re, electric shock, etc. The entire product may not be altered respectively modi ed and the casing may not be opened. The
safety notices have to be observed under all circumstances!
2. Product description
The Mc Crypt DJ-40 DJ Mixer enables you to regulate the volume and mix several audio sources such as a turntable, CD player or cassette deck
and the signals from two microphones. The mixer is equipped with 2 channels which are each controlled by a fader. An adjustable headphone
output allows you to pre-listen to the input signals.
3. Features
2-channel mixer
1 microphone input
2 stereo turntable inputs
2 stereo inputs for CD player, cassette deck, tuner etc.
1 stereo MASTER output
Headphone connector with adjustable volume
LED recording level display
CROSSFADER function
Input level control
4. Scope of delivery
Multi mixer
Operating instructions
5. Explanation of symbols
The lightning symbol is intended to warn of the risk of mortal electric shock or the impairment of the device’s electric safety.
Never open the device!
An exclamation mark in a triangle indicates important instructions in the operating manual. Carefully read the whole operating
manual before putting the device into operation. It contains important information about correct operation of the device.
This symbol indicates special information and advice on operation of the device.
The device must be operated in enclosed and dry rooms only.
The product is constructed in compliance with protection class 2 (double or extra insulation).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Mc crypt DJ-40 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Mc crypt DJ-40 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info