701385
17
Zoom out
Zoom in
Previous page
1/24
Next page
INPUT
6V
0.2V
40Hz
180Hz
R
L
INPUT LEVEL
LOW PASS
0dB 12dB
BASS BOOST
15Hz
55Hz
SUBSONIC
REMOTE
SLAVE
IN
MASTER
OUT
SLAVE
IN
MASTER
OUT
FUNCTIONS AND OPERATIONAL CONTROLS
1
The SLAVE IN/MASTER OUT switch selects the required operation mode of the amplifier.
In the SLAVE-Mode the amplifier works as a SLAVE amp, this means only the audiosignal of the MASTER amp will be amplified.
All controllers on the SLAVE Amp are without function and will be assumed by the MASTER amp.
In the MASTER-Mode (Low Pass mode) you are able to limit the frequencies to above with the LOW PASS controller. All controllers
are active. NOTE: By using only one amplifier, the Mode-Switch must set to the position MASTER OUT.
3
The INPUT LEVEL controller adjusts the input sensitivity of the amplifier to align the audio signal from the head unit.
The input sensitivity is adjustable from 6 to 0.2 Volts.
6
The SUB SONIC controller (Subsonicfilter) limits the ultralow and not hearable frequencies of the audiosignal to below, to avoid
a mechanical and electical overloading on the subwoofer. The cut-off frequency is adjustable from 15 to 55 Hz and depends on
the size of the subwoofer.
Connect the REMOTE port with the bass remote controller (only in the MASTER mode). The bass remote controller adjust the
bass level e.g. out of the driver’s seat. Please use only the enclosed bass remote controller and cable.
2
4
5
The BASS BOOST controller adjusts the bass enhancement between 0db and +12dB.
7
The LOW PASS controller adjusts the cut-off point of the frequency range to above. The cut-off frequency is
continuously adjustable from 40 Hz to 180 Hz.
8
The MASTER OUT / SLAVE IN RCA jacks are suitable to connect an additional amplifier in MASTER/SLAVE mode.
Attend therefor the chapter Interconnection Example: MASTER/SLAVE on page 19.
6 7 81 43 52
The LINE INPUT RCA jacks must be connected with the RCA output jacks of the headunit. Both of them must be used. If your
headunit only provides one RCA jack, use a y-connector.
F U N C T I O N S A N D C O N T R O L S
NSC750
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for MB Quart NSC750 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of MB Quart NSC750 in the language / languages: English, German as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info